Re: Dynex DX-L42-10a Video issues
I have them off to the side and I attempted top reinsert the cables with no difference as an result.
The screws were in it when it was tested....
nstlfrk
Senior Member
Last Activity: 01-25-2017, 11:10 AM
Joined: 04-16-2014
Location: salina, Ks
-
Re: Dynex DX-L42-10a Video issues
Here you go sorry about that....Leave a comment:
-
Dynex DX-L42-10a Video issues
My screen has lines in it and am wondering if it is something related to the LCD or maybe another part inside the TV like the TCON board maybe? It does not always have them sometimes it works fine.
Can any of you give me an idea or help me out?... -
Re: Sony KDL-46EX500
Anyone have any ideas?Leave a comment:
-
Sony KDL-46EX500
I have this tv I am working on and it is dead completely. No lights or sound or anything when plugged in. The only thing I noticed is when you first plug it in the black relay located at RY6002 clicks on and stays that way til you either unplug the TV from the wall or unplug the main harness from the main board located connector at CN6150.
Can any of you guide me in a direction please?
Thanks... -
Re: Sony KDL-52v5100 55" LCD Issues
Screen was bad I scrapped the TV...Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
Not problem other then where do I find something like this?...Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
pwm - 4.67
fb - .32
ovp - .97...Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
gnd/vin - 10.80
gnd/gate - 0.00...Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
cleaned off the chip and magnified it
here is what is on it
d31168
ob3350cp...Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
Just can not read it. Sorry but it is just glossy. I cant even see markings....Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
The D20 is D200 and the Diode tested good....Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
The complete part number of it looks to be D200
Now You have me at a loss now. I apologize a head if time.
What is the SMD IC U200?
I also dont see a Diode on a heat sink. Do you mean next to it?
Sorry bare with me....Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
BL-ON shows 4.8VDC when on...Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
ec7 - 100v100uf
ec201 - 160v47uf
ec202 - 160v47uf
pins 1 2 3 measure between .39 to .41 when set on 20k
the + leg of ec7 measures at 82.4v...Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
BUDM
Ok all 3 of the L- pins on both connectors measure zero when the power button is pressed to turn on and the stand by led is off.Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
For some reason I was not catching on as I re read all your statements I still did not GET IT.. Sorry to frustrate you. I will take this reading over my lunch hour and report back.
Thanks for sticking in there and helping I do appreciate it....Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
Nope...Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
Pins 1, 2, 3 all measure a ground. Pin 4 is open and pins 5, 6, 7 all measure 81.9 volts....Leave a comment:
-
Re: RCA LED52B45RQ Will not turn on
Yes they all 3 (as in the red ones) on each plug measure the same. Is this a good thing?
LED+ Measure 81.9 The others do not....Last edited by nstlfrk; 10-03-2016, 09:05 PM.Leave a comment:
No activity results to display
Leave a comment: