proscan pled3216a upside down picture (mainboard replaced)

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • Shinju
    Badcaps Legend
    • Mar 2014
    • 1239
    • USA

    #1

    proscan pled3216a upside down picture (mainboard replaced)

    Just like the title states, installed the new mainboard old one wasn't working and now that when I turn it on the pictures upside down I don't see any orientation settings in the menu so what could happen?
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: proscan pled3216a upside down picture (mainboard replaced)

    If you look up the LCD panel model number to get the spec sheet, it may show one pin for the display orientation.
    Does this new board have the same PCB assembly as printed on the barcode or on the sticker?
    You may want to go to Shopjimmy to see which board is compatible with your chassis.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • R_J
      Badcaps Legend
      • Jun 2012
      • 9515
      • Canada

      #3
      Re: proscan pled3216a upside down picture (mainboard replaced)

      There could also be a setting in the service menu for this, I know others have it.
      Try this Menu+1147
      Last edited by R_J; 12-19-2014, 08:33 PM.

      Comment

      • Shinju
        Badcaps Legend
        • Mar 2014
        • 1239
        • USA

        #4
        Re: proscan pled3216a upside down picture (mainboard replaced)

        Mainboard was purchased from SJ, the panel number and board number match. Funny part the original board had a different number.

        I tried to do a factory reset but I don't have the remote I think it requires a physical enter key not able to do so with the side buttons.

        Comment

        • Shinju
          Badcaps Legend
          • Mar 2014
          • 1239
          • USA

          #5
          Re: proscan pled3216a upside down picture (mainboard replaced)

          If anyone has any information to get into the service menu that would be great I tried looking up at Tom manuals and I couldn't find anything for this.

          Comment

          • Shinju
            Badcaps Legend
            • Mar 2014
            • 1239
            • USA

            #6
            Re: proscan pled3216a upside down picture (mainboard replaced)

            The old MB numbers all match except the T315XVN01.1.

            Panel number: T315XW06 V.3
            SJ replacement MB: T315XW06 V.3

            Comment

            • budm
              Badcaps Legend
              • Feb 2010
              • 40746
              • USA

              #7
              Re: proscan pled3216a upside down picture (mainboard replaced)

              Hmm, did you contact shopjimmy to see what they would suggest?
              Never stop learning
              Basic LCD TV and Monitor troubleshooting guides.
              http://www.badcaps.net/forum/showthr...956#post305956

              Voltage Regulator (LDO) testing:
              http://www.badcaps.net/forum/showthr...999#post300999

              Inverter testing using old CFL:
              http://www.badcaps.net/forum/showthr...er+testing+cfl

              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
              http://s807.photobucket.com/user/budm/library/

              TV Factory reset codes listing:
              http://www.badcaps.net/forum/showthread.php?t=24809

              Comment

              • Shinju
                Badcaps Legend
                • Mar 2014
                • 1239
                • USA

                #8
                Re: proscan pled3216a upside down picture (mainboard replaced)

                They were closed when it came in. I will call them in the am and see.

                This is strange , factory reset does nothing, seems like something in a service menu that might be able to change this but I cannot find any thing. Being that RCA makes proscan maybe the RCA service menu button access works on this unit.

                Comment

                • Shinju
                  Badcaps Legend
                  • Mar 2014
                  • 1239
                  • USA

                  #9
                  Re: proscan pled3216a upside down picture (mainboard replaced)

                  I will upload some photos, there is a AUO LVDS adaptor board.
                  Attached Files

                  Comment

                  • Shinju
                    Badcaps Legend
                    • Mar 2014
                    • 1239
                    • USA

                    #10
                    Re: proscan pled3216a upside down picture (mainboard replaced)

                    Mainboard
                    Attached Files

                    Comment

                    • Shinju
                      Badcaps Legend
                      • Mar 2014
                      • 1239
                      • USA

                      #11
                      Re: proscan pled3216a upside down picture (mainboard replaced)

                      Everything.
                      Attached Files

                      Comment

                      • budm
                        Badcaps Legend
                        • Feb 2010
                        • 40746
                        • USA

                        #12
                        Re: proscan pled3216a upside down picture (mainboard replaced)

                        I look at the spec sheet of your panel, there is no control pin for the picture orientation setting.
                        Never stop learning
                        Basic LCD TV and Monitor troubleshooting guides.
                        http://www.badcaps.net/forum/showthr...956#post305956

                        Voltage Regulator (LDO) testing:
                        http://www.badcaps.net/forum/showthr...999#post300999

                        Inverter testing using old CFL:
                        http://www.badcaps.net/forum/showthr...er+testing+cfl

                        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                        http://s807.photobucket.com/user/budm/library/

                        TV Factory reset codes listing:
                        http://www.badcaps.net/forum/showthread.php?t=24809

                        Comment

                        • Shinju
                          Badcaps Legend
                          • Mar 2014
                          • 1239
                          • USA

                          #13
                          Re: proscan pled3216a upside down picture (mainboard replaced)

                          So it's all software then, wonder if there is a way to access the SM and change it.

                          I have never run into anything like this before.

                          Thank you budm for taking the time to research that.
                          Last edited by Shinju; 12-19-2014, 11:31 PM.

                          Comment

                          • Shinju
                            Badcaps Legend
                            • Mar 2014
                            • 1239
                            • USA

                            #14
                            Re: proscan pled3216a upside down picture (mainboard replaced)

                            Boo, they are closed on Saturdays!

                            Oh well, if anyone knows how to access a Proscan service menu please chime in!

                            Seems this mainboard is used in several lower end brands, Westinghouse, RCA, Seiki, and a few others.

                            Comment

                            • Shinju
                              Badcaps Legend
                              • Mar 2014
                              • 1239
                              • USA

                              #15
                              Re: proscan pled3216a upside down picture (mainboard replaced)

                              Just got off the phone with SJ and they have no clue so they sent me a complimentary return refund instead of charging me shipping and a 20% restocking fee.

                              Guess this one is going to the recycler, I cannot find my version of the mainboard at all.

                              Mainboard Originally installed in the unit.
                              L12100204
                              T315XVN01.1

                              Panel Number:
                              T315XW06 V.3



                              For other users that might run into this for future reference.

                              Bummer, first panel that I will be scrapping that doesn't have a busted screen.

                              Comment

                              • R_J
                                Badcaps Legend
                                • Jun 2012
                                • 9515
                                • Canada

                                #16
                                Re: proscan pled3216a upside down picture (mainboard replaced)

                                Did you try Menu+1147 ?

                                Comment

                                • Shinju
                                  Badcaps Legend
                                  • Mar 2014
                                  • 1239
                                  • USA

                                  #17
                                  Re: proscan pled3216a upside down picture (mainboard replaced)

                                  Is that the button combo to get into the service menu? I take it this is imputed when the panel is on?

                                  Comment

                                  • R_J
                                    Badcaps Legend
                                    • Jun 2012
                                    • 9515
                                    • Canada

                                    #18
                                    Re: proscan pled3216a upside down picture (mainboard replaced)

                                    Thats what I understand from another forum, press ( menu - 1 -1- 4 -7) thats the only one I found.

                                    Comment

                                    • Shinju
                                      Badcaps Legend
                                      • Mar 2014
                                      • 1239
                                      • USA

                                      #19
                                      Re: proscan pled3216a upside down picture (mainboard replaced)

                                      I was able to get in. But I don't see any setting for screen orientation. I did see an option for LVDS odd or even the panel set to ODD if I put it to even then the screen goes blank back light stays on.

                                      I see some options for mirror mode, debugging and advance debugging but when turned on I don't see any extra screens I'm not sure how to access that stuff.

                                      Comment

                                      • Th3_uN1Qu3
                                        Believe in
                                        • Jul 2010
                                        • 6031
                                        • Romania

                                        #20
                                        Re: proscan pled3216a upside down picture (mainboard replaced)

                                        Stupid suggestion, i know, but do you have any reason why you can't just mount the LCD upside down? It might take a bit of mechanical work to have it all fit correctly, but should be doable.
                                        Originally posted by PeteS in CA
                                        Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
                                        A working TV? How boring!

                                        Comment

                                        Related Topics

                                        Collapse

                                        • Ierwin
                                          Samsung UE60KU6079 backlight okay mainboard responsive, no picture, no sound
                                          by Ierwin
                                          Hello everyone,
                                          Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
                                          The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
                                          He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
                                          I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
                                          Anyway I still fully expect that there has been something seriously damaged...
                                          05-13-2025, 03:31 PM
                                        • stylishconsultant
                                          un60j620dafxza - Samsung No Display Problem
                                          by stylishconsultant
                                          Hi All,

                                          Need help.

                                          I have a samsung un60j620dafxza led tv. When I plug it in it has no display, no sounds, and no standby lights.

                                          So I opened the tv and disconnected the power to the mainboard and the backlight powered up. This according to many people says that this is a mainboard
                                          problem. I checked the voltage coming from the stb and I read 1.3 volts on pins 1,3,5 and 7 which are low volts instead of 13 volts which i think the lcd panel
                                          might be drawing too much power from the power supply that it prevents the right voltage going to the mainboard....
                                          09-04-2024, 03:26 AM
                                        • garrymc123
                                          Luxor TV board input board change but picture upside down
                                          by garrymc123
                                          Looking for some advice changed over the video input board due to bad hdmi ports but now the picture is upside down tried the service menu but can't find anything to do with flip the picture..

                                          Is there anything I can do to flip the picture or do I need to change the board again..

                                          Thanks
                                          Garry...
                                          08-29-2022, 04:53 AM
                                        • Tr0ll
                                          T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                                          by Tr0ll
                                          Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                                          The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                                          Original T-con:
                                          Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                                          First replacement T-con:

                                          I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                                          10-07-2023, 07:48 PM
                                        • JJAAMM
                                          SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                                          by JJAAMM
                                          This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                                          Problem
                                          TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                                          07-06-2023, 06:01 AM
                                        • Loading...
                                        • No more items.
                                        Working...