Vizio VA370M Vizio Logo Stuck

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • barryra
    Senior Member
    • Aug 2013
    • 107
    • USA
    #1

    Vizio VA370M Vizio Logo Stuck

    Sorry if this issue has been brought up. The Vizio logo is on the screen & no buttons on the TV will make it go away.

    Is this a main board issue & can it be repaired (how) or does it need a new board? Thanks
    Tags: None
    • barryra
      Senior Member
      • Aug 2013
      • 107
      • USA
      #2
      Re: Vizio VA370M Vizio Logo Stuck

      bump.... thanks for your info...

        Comment

        • Alastair E
          Chief Womble
          • Mar 2013
          • 1963
          • U.K.
          #3
          Re: Vizio VA370M Vizio Logo Stuck

          From what I gather--Mains do seem to fail in these sets. I have no personal experience of that make, never seen one here.

          Maybe its the F/W that becomes corrupted, thats the sort of fault Ive had on some shall we say--cruddy makes I have seen!
          TELEFIX

          How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
          http://www.irf.com/technical-info/appnotes/an-1088.pdf
          PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

            Comment

            Previous template Next

            Related Topics

            Collapse
            • x_orange90_x
              Vizio V555-G1 stuck on wallpaper; now stuck on V logo
              by x_orange90_x
              I just got this tv today and it's getting stuck on the wallpaper. When I first power it on it goes to the V logo, then a black screen for about 15 seconds, then a Chromecast error for just a few seconds, and then finally to a wallpaper. It stays frozen on this wallpaper and does not respond to anything on the remote besides power on/off. Likewise the buttons on the tv do nothing either (besides power). I did the "reset" by holding the volume down and input buttons together for 10 seconds. It showed a message at the top of the screen saying it was Wiping Data and would restart soon. After...
              12-28-2023, 06:26 AM
            • paulxxxx
              Vizio E701i-A3 stuck at logo, need service manual
              by paulxxxx
              The TV stuck at logo and cannot be turned off unless the cord is unplugged.
              I was given two main boards and exactly the the same thing happens to both of them.
              I have checked all voltages on the connector on the power board that goes into the main board and they all look OK.
              There are no signs of damage on any of the 3 boards.

              Would someone help me with a pointer to the manual? It's supposedly to be the same as E601i-A3.

              Thanks!
              09-08-2023, 01:11 PM
            • Bob1394
              Vizio M65-C1 | Logo appears for 10 seconds then off
              by Bob1394
              I have used the search, and am stumped.

              My Vizio M65-C1, Vizio logo appears for about 10 seconds then goes off.Power LED blinks 15 times then the TV powers down.

              I have read through many threads on the M65-C1 including the following threads. I feel like I must be looking right past the solution to my problem:
              https://www.badcaps.net/forum/showthread.php?t=81088
              https://www.badcaps.net/forum/showthread.php?t=84241 (not clear on the Eprom actions)


              Observations

              1) [Interaction] Power turned on via TV button (or remote)...
              02-08-2023, 01:03 PM
            • Mectronik
              Vizio m601d-a3 backlight issue
              by Mectronik
              Hello, I'm working on a Vizio m601d-a3 with a backlight issue that I am having a difficulty diagnosing it. As it sits, the tv powers on, displays the Vizio symbol and with nothing hooked up it will then display no signal but you can only see half of the screen. I know it's a back light issue because the picture is there without light behind it, as I can see it by doing a light test. I've taken off the paneling and done a visual inspection. If I disconnect the tcon ribbon cable to the affected side then the entire half of the screen goes away. I've checked voltages at the LED driver from the main...
              11-05-2023, 10:20 PM
            • Super360
              Vizio E701i-A3 Vizio logo flashing then turns off
              by Super360
              Ok so here's the story. I was watching tv one day when all of a sudden I heard a pop from the back of the tv set and rushed to unplug the set. By this time the tv already had smoke coming out the back. It was not storming or inclement weather that day to cause a power surge to the best of my abilities. When I opened the tv up, I found that the three capacitors on the psu (highlighted in red) were all bulging and looked they had exploded. I replaced all of them right away and when I went to start up the tv after the "fix" it started just showing the flashing vizio logo as soon as power...
              07-25-2024, 07:06 PM
            • Loading...
            • No more items.
            Working...