Left hand side of the screen, but the right hand side is solid white. I replaced the T-Conn now all I have is just a glow from the blacklight. Anybody had a issue similar to this? I have also tried 2 mains boards as well. Does this look like a T-Conn problem?
Samsung UN55EH6000 screen problem pic included
Collapse
X
-
Tags: None
-
Re: Samsung UN55EH6000 screen problem pic included
I would go for panel myself having seen similar symptoms before. Maybe water damage or could just be sudden panel death...Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Samsung UN55EH6000 screen problem pic included
Sorry guys I've been out of the loop. I have another T-Conn on the way from a reputable company. I will advise what happens, hopefully it doesn't have water damage!
Thanks for the advice guys!Comment
-
Re: Samsung UN55EH6000 screen problem pic included
Have you broken the panel down to the TFT Tab bond boards to see if there was damage or Electrolysis build up on the connections?
I have seen 5 panels die to Windex soaking screens!
I would check out those tabs before putting in a new t-con cause if that corrosion/Electrolysis is shorting out you are going to blow that T-con.Comment
-
Re: Samsung UN55EH6000 screen problem pic included
Shinju, thanks for the heads up! I tried the tv with the corridored connector unhooked and the screen didn't change. So I reckon this TV is cashed by water, windex, and or Busch Light. Anyone need componets for a Samsung UN55EH6000? I would also like to thank everyone that posted advise and or opinions on my first thread!Comment
Related Topics
Collapse
-
by ChrissygizmoHello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same... -
by ChrissygizmoHi , I've recently replaced the screen in my Samsung galaxy ao2s, at first it wouldn't even turn on, it had the charging symbol on the screen when plugged in but the green circle wasn't going around to show it charging....
Ive eventually managed to get it on and working but it's very temperamental...
The battery icon always reads as 50% , when the phone goes into lock screen mode i sometimes can't get the screen back on unless I plug the charger in to get it to light up, also it keeps putting the camera app on.. u think it could be something to do with the side buttons. ...05-26-2024, 12:05 AM -
by KibergeHI guys!
I've got a Samsung LH82QENELGC/EN with a problem and need some advice and I hope this is the forum to use?
I'm from Norway so I'd like to apology in advance if my description of the fault is kind of simple or the names on the components are way off. 😊
the TV is powering up, working as normally and picture is all good, except a 1.5-inch-wide vertical line of snow/static across the screen.
This TV is a Signage Display/Public Display version and it's been used at my work for 4-5 years showing commercials 24/7. The fault occurred when... -
by Ryan.manHello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!
My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.
This time the original cable broke too close to the screen, it can't be fixed without tearing the screen... -
Have a Samsung UN50NU7400 which shows a boot screen and a screen saver if left on long enough but no picture ?
Would a moving screen saver confirm that the panel is ok or it could still be a panel issue ? - Loading...
- No more items.
Comment