General question about main and power board part numbers and versions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tucocaps
    Badcaps Veteran
    • Apr 2013
    • 331
    • United Stated

    #1

    General question about main and power board part numbers and versions

    Hello,

    For plasma and lcd, I'm getting a bit confused on some board replacements. This is mainly with mainboards , and some power boards. I notice that with brands like Samsung, there will be 2-3 different part numbers on the board, along with a version number in some cases (usually on the barcode label).

    When you look on ebay, it seems some sellers will state a board is compatible with "others", but I'm not so sure. Do all part and version numbers generally need to match? If not, is there any resource I could check for the various OEM's? Thanks!
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: General question about main and power board part numbers and versions

    Go to shopjimmy website, it will tell you what numbers you will need to match what you have. They also provide the compatible info for the boards.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • tucocaps
      Badcaps Veteran
      • Apr 2013
      • 331
      • United Stated

      #3
      Re: General question about main and power board part numbers and versions

      Thanks again Budm! This is helping Although, does shopjimmy carry all LG boards? I'm seeing some searches not showing.

      Comment

      Related Topics

      Collapse

      • ygorsan
        LG 55NANO77SRA TV – Menu scrolling by itself even after removing button board (Main Board EBU66792103)
        by ygorsan
        Hi everyone,




        I’m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







        🧩 Problem Summary:
        • The TV keeps scrolling through the menu or selecting items by itself.
        • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
        • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
        • I
        ...
        07-28-2025, 08:34 AM
      • jb_Bak
        Sony xbr-65x900c main board issues?
        by jb_Bak
        Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

        Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
        Power Board Connector that goes to Main board
        CN6401
        Pin 01 NC
        Pin 02 NC
        Pin 03 "BL_ON": 0V
        Pin 04 "N/C"
        Pin 05 "STBY 3.3V": 3.5V
        Pin 06 "GND": N/C
        Pin 07 "AC_OFF"...
        09-27-2021, 04:52 PM
      • JDC
        (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
        by JDC
        ONN 100012588
        Issue: No Power, Then Rebooting After Main Board Change

        Short answer: replace main board and power board
        Technical answer: replace main board and Q306 & Q307 on power board.

        Long answer:

        TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
        07-15-2022, 07:39 AM
      • m1ch43lzm
        HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
        by m1ch43lzm
        Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
        Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
        05-12-2025, 08:37 PM
      • cheeky2
        Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
        by cheeky2
        I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
        Obviously the same LVDS connector for the screen connection...
        05-25-2024, 03:27 AM
      • Loading...
      • No more items.
      Working...