Lg 47lm860v 3d tv- no picture

[Longon]

Ok, i'm a bit sorry for the rude post, but following certain threads takes so long, too much posts without a single test, i make hard effort to express myself in another language, doing this also when i'm at work, risking accident with the boss..

reading back the posts, you have 11,6v on the tcon input, this sounds a bit low to me, like a stressing dc dc at valley, then the 3 caps at 0,3v, them are also dirty, clean well them and test the whole tv, if 0,3v still there, remove the 3 caps, one of them can be shorted, if you have a good multimeter, NO 5 euro testers, check ohms slowly across all them, if 0ohms try remove first the one with less decimals measure, check again.. probably tcon is at fault..

Hey Davi.P....
I appreciate your humble approach in this conversation. It’s important for us to maintain respect in our discussions. As someone new to this forum and facing mobility challenges, I sometimes find it difficult to get to my workshop area and participate fully. I really appreciate the contributions from all members, as they provide valuable perspectives that help me improve.
Let’s put this behind us and focus on creating a positive environment where everyone feels encouraged to share. We all have unique experiences that can enrich our discussions.
After checking your recommendations I will return my findings.
Long