Sony Bravia KDL-46XBR2 Green light, then flashing red light

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Gadjet
    Badcaps Veteran
    • Aug 2012
    • 248
    • United States
    #1

    Sony Bravia KDL-46XBR2 Green light, then flashing red light

    I just installed a new power supply into this tv but there is still a problem. When I press the power button I get a green light but nothing happens. after a few seconds the light goes out. Then there is a flashing red light. Flashes 13 times. I only replace the main power supply not the sub boards.
    Attached Files
    Tags: None
    • tibimakai
      Badcaps Legend
      • Jan 2012
      • 3680
      • USA
      #2
      Re: Sony Bravia KDL-46XBR2 Green light, then flashing red light

      Download the service manual from elektrotanya.com and find out what it means that 13 blink error code.
      http://elektrotanya.com/?q=showresult
      If I'm not mistaken, is CCFL tube.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • MOSSEP
          Monitor Audio RSW12 - Green light, but no sound
          by MOSSEP
          Hi

          Im hoping someone might be able to give me some idea of what may be wrong with my Monitor Audio RSW12 Sub.

          Ive owned it since new in around 2002, so would really like to keep it running if I can, it was the first ‘decent' bit of audio equipment I ever purchased and is a little sentimental.

          The issue I had was that it would power up with the red light, but sometimes the green light would not come on and I would get no bass from it. If the green light did come on though, I would get sound out of it.

          I have already tried replacing all of the...
          01-26-2025, 08:33 AM
        • MOSSEP
          Monitor Audio RSW12 - Green light but no audio
          by MOSSEP
          Hi

          Im hoping someone might be able to give me some idea of what may be wrong with my Monitor Audio RSW12 Sub.

          Ive owned it since new in around 2002, so would really like to keep it running if I can, it was the first ‘decent' bit of audio equipment I ever purchased and is a little sentimental.

          The issue I had was that it would power up with the red light, but sometimes the green light would not come on and I would get no bass from it. If the green light did come on though, I would get sound out of it.

          I have already tried replacing all of the...
          01-26-2025, 08:18 AM
        • lcdcaps1
          820-2610-A Sys onewire help, no green light. Please help from the gurus
          by lcdcaps1
          Hi

          I have an 820-2610-A motherboard that has no green light.
          I have noticed is when I do a SMC reset the light on the Magsafe blinks.
          From My understanding, the sys onewire circuit is responsible for the green light on the magsafe
          The sys onewire circuit on this model and others is more involved
          I was hoping if anyone knows about this and how it works, can reply and let me know
          I know this is an old model but I am sure there are people who still works on these or knows about them

          I get 1.1v on the C7771 capacitor and will replace...
          11-06-2023, 01:28 PM
        • esqmooo
          HP Elitebook 845 G8 dead, only caps lock flashing 7 times. Charging light always on
          by esqmooo
          Hello everyone.

          This is my development machine. I've been using it since two years and half without any problem except sometimes it wouldn't wake up from sleep.
          Lately the issue became more frequent and powering it up would take few seconds to show the POST screen.
          Then the computer refuses to power on at all. Now only the caps lock button flashes 7 times then stops. The charging light is always on whenever a power source is connected (battery or charger).
          I tried long pressing on the power button, after several seconds it would go off then when the button is released...
          03-11-2025, 03:57 PM
        • learnmore
          Samsung QE55Q60TAUXXU - flashing backlight and flashing standy light--no image
          by learnmore
          Hello Community!

          CASE DETAILS

          Promblem Signs: Backlight on 1 sec off 7sec > repeat && Red standby light: 1blink, off 3 sec, 2 blinks, off 5 secs, 2 blinks, off 3 sec, restart cycle

          13V present on powerboard output. Backlight continues flashing after removing cables to pannel one at a time and even with both disconnected. NOTE: backlight STOPs flashing and remains on when connector between powerboard and mainboard (note Tcon built in) is disconnected.

          Tried inserting firmware on USB and left it in for a few hours, but no change
          ...
          03-03-2024, 09:49 AM
        • Loading...
        • No more items.
        Working...