Gadjet
Badcaps Veteran
Last Activity: 04-23-2025, 03:08 AM
Joined: 08-05-2012
Location: Ponitac
-
lotas[USER="169795"]lotas[/USER] ok that's not good, I'll double-check the old CPU with the new memory and update the post. -
Thanks, [USER="414449"]harp[/USER] sucks Mouser has them markered as [B]o[/B]bsolete I just got the CPU and Memory from there. @[B][URL="https://www.badcaps.net/member/277059-truclacicr"]truclacicr[/URL] [/B]Thanks for a place where I can purchase it another 2 wks is going to suck as well. Got another question either of you have an idea of why it went up in smoke I was able to plug it up no problem before replacing the 2 chips. Was it the 3.3 regulator?harpLeave a comment:
-
Vanquish CMH lighting system Controller Board
Ok so let me run you through the chain of events, the controller stop coming on no video, after checking the board they were lots of shorts on the board. I removed the screen a couple disappeared, then I removed the cpu and more disappeared, lastly I removed the memory chip and all shorts were gone. (The 2 chips circled in red are the memory and cpu) Also there is an issue with the 5v test point that is circled it’s reading 12v and so is a 3.3v regulator next the power jack.
Ordered a new CPU and Memory chip and installed them, reconnected the screen and all shorts are gone. Reconnected... -
Looking for this inductor 151
Anyone know how I can find a replacement for this inductor, it just has 151 on top. It was broken on one side, it’s from the main board of a Blu-Ray drive belonging to a PS5 model: CFI-1215A....
-
well there is a gold piece missing from the jack, and it pulled the pads from the board, I scratched around the pads to see if there were any traces. I'll cover them with a mask after adding new pads.Leave a comment:
-
peloton monitor motherboard headphone jack replacement
This jack was broken off the board and I can't seem to find a replacement anywhere. it has an inclined female end. Any help is appreciated... -
Part arrived quickly installed and it's now powering on. Thank you so much @[B][URL="https://www.badcaps.net/member/393718-stanislavnovak"]StanislavNovak[/URL] !!![/B]Part arrived quickly installed and it's now powering on. Thank you so much @[B][URL="https://www.badcaps.net/member/393718-stanislavnovak"]StanislavNovak[/URL] !!![/B]Part arrived quickly installed and it's now powering on. Thank you so much @[B][URL="https://www.badcaps.net/member/393718-stanislavnovak"]StanislavNovak[/URL] !!![/B]Part arrived quickly installed and it's now powering on. Thank youLeave a comment:
-
Thanks for the info I will order one and see if it works, I've been looking for this chip for months!Leave a comment:
-
Need help finding this chip! for an amplified speaker.
Looking for a chip and can't find it anywhere, or would anyone know what I could replace it with? Belongs to a powered amplified speaker. -
Need Schematic for RCF EVOX J8 two way array
need Schematic for RCF EVOX J8 two way array -
No Power on a RCF EVOX J8 two way array speaker
So I don't see anything obvious, and I'm not an elite electrician. I do have tools and technical ability...lol. with that being said I checked the board with my infrared camera (it's a little out of alignment) and this is what I saw. Not sure if it's the U14 (IC s21531d) or the chips R600, and R601. Any help would be appreciated.... -
Re: Vizio M420SL Backlight Issue
Thanks for the suggestions, I will put it back together and post the results.Leave a comment:
-
Vizio M420SL Backlight Issue
Just picked up this unit the previous owner said one day he turned it on and he didn't get any video but he had sound. When I plugged it in it had audio and video (pic 1). After about 10-15 mins the backlights went out, the flashlight test shows a picture still running in the background. I disassembled the unit and tested the lights with my backlight tester seems to be just one strip of lights running down the left side of the screen. Each section of the strip I tested showed no sign of an individual led being out. So my question is does it sound like a led or power supply issue or could it still... -
Re: Vizio P502UI-B1E No Picture Flashing Standby Light
@cwood where did you find a board? I can't find one in stock anywhere!Leave a comment:
-
Re: Vizio P502UI-B1E No Picture Flashing Standby Light
Thanks, @Nick's tvs, Yeah I had tried the eeprom, haven't been able to find a board in stock anywhere. encompass parts is the only one that has it in stock but the price is beyond ridiculous. I've had a stock alert set at shop jimmy since Aug 9th, 2018. Do you have any suggestions on where I can get one?Leave a comment:
-
Vizio P502UI-B1E No Picture Flashing Standby Light
Ok so when I plug it in the standby light comes on and goes out. Then I hit the power button and it does the same thing but I can see the light from the optical port and the lights are flashing on the network port when I plug in an ethernet cord. After about 5 mins the stand-by light flashes like 23-24 times then the power goes off. I don't see the optical port lit up any more or the network port. I've got a new power supply and changed the eeprom on the Main Board still no change....Last edited by Gadjet; 09-02-2018, 01:25 PM. -
Re: 55" RCA LED55G55R120Q no backlights
@budm...I've checked all the voltages they are the same when the backlights are working and not working, aside from the fact that the backlight connector on the power supply is no longer getting any voltage when the backlights go out. The rev. on the mainboard I ordered is older it's an (a1) and the original is an (a2). I've even tried swapping the EEPROMs. The same thing happens.Leave a comment:
-
Re: 55" RCA LED55G55R120Q no backlights
@budm I was speaking of the backlights, after about 1-3 hoursLeave a comment:
-
Re: 55" RCA LED55G55R120Q no backlights
@capleaker
The TV works as it should, backlights are on everything works. After maybe an hour or more that's were the problem comes in. If I turn the tv off and back on the backlights might come on or they might not. If they do not I have to unplug the tv and hold the power button. when I plug it back up the tv will power up again and work as it should for as long as I leave it on. I've had it running a whole day no problem. There is a random issue with the backlights losing power somehow. The picture is still there if I...Last edited by Gadjet; 12-08-2017, 01:09 PM.Leave a comment:
-
Re: 55" RCA LED55G55R120Q no backlights
Ok, latest update, I understand how everyone feels about the company but it's a clients tv so it would be bad customer service for me to kick the panel in...lol. I installed a new FRC board a day ago and the tv ran close to an entire day turning it off and on, and changing inputs so everything seemed fine but I still didn't trust it. Turned it off and on a few times this morning and Bam!!! The lights flashed and that was it, the sound is always there and as I've stated if I unplug it then plug it back in it will come back on without any...Last edited by Gadjet; 12-07-2017, 11:51 AM.Leave a comment:
No activity results to display
Leave a comment: