Diffuser/LPG for UE50NU7022KXXH

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • V3dran
    Member
    • Aug 2012
    • 27
    • Bosnia
    #1

    Diffuser/LPG for UE50NU7022KXXH

    Hello,
    I'm trying to repair a UE50NU7022KXXH with a cracked diffuser/lpg and now also with burned leds
    There are 4/5 white spots on the bottom that are not visible since the left side is dark now so I want to change the diffuser/lpg

    Looking the samsung spare parts, I see that there is a DIFFUSER PLATE and a LPG so I'm wondering what is really broken?
    https://www.samsungparts.eu/samsung-...n61-15659a.htm DIFFUSER PLATE 1125x625x2,5mm
    https://www.samsungparts.eu/samsung-...n61-15661a.htm LPG 1101x619x2,7mm

    Thank you
    Attached Files
    Tags: diffuser, lpg, samsung
    • EazyBone
      Badcaps Legend
      • Jun 2023
      • 1306
      • United states
      #2
      You need new LEDs and a new diffuser. If you look on marketplace for a 50 with a cracked screen you can transfer it over also. I don't know the acronym lpg so can't comment on that. I've never bought a new diffuser because they are too expensive. $40 ain't bad for you, usually they are $300+ here. Maybe 50 inch is small enough

        Comment

        • V3dran
          Member
          • Aug 2012
          • 27
          • Bosnia
          #3
          Actually is a typo, it is LGP (light guide plate) or plexiglass as here https://www.avelmak.sk/produkt/89733?lm=1878
          The diffuser looks like a transparent white panel https://fixpart.co.uk/product/samsun...ate-television but on this link I see a comment that the part is not good for ue50nu7020 which is basically the same TV
          Attached Files

            Comment

            Previous template Next

            Related Topics

            Collapse
            • lfhlaw
              Busted/cracked Light diffuser plate Samsung UN55NU7100
              by lfhlaw
              I was attempting to replace the LED lights on an Edge-lit Samsung UN55NU7100...While removing the sheets and the light diffuser plate which already had cracks at the bottom. The plate bent(more than I'd like) and broken in half.

              1) Is it still usable if I can put in back into place

              2) or Do I have to find a replacement diffuser plate and can it be any diffuser plate from a 55" Samsung LED TV or specific to my model?

              3) can a new plate be purchased from Samsung?
              03-21-2021, 01:31 PM
            • howardc64
              A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
              by howardc64
              Problem

              This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
              08-04-2024, 10:36 PM
            • Pipolups
              Corsair K70 LUX RGB dying LEDs
              by Pipolups
              Hi there !

              I'm having an issue for several weeks with my quite old K70 LUX RGB keyboard. I haven't used it for few months, and once I setup up again my desktop computer, I got several dead LEDs on that keyboard. I tried the Corsair troubleshooting thing (disabling options in iCUE, ...) but nothing changed so I conclude that for some reason some LEDs went in retirement...😅
              Decision taken to change these LEDs as I have access to desoldering iron and binocular magnifier, I wrote a ticket to tech support, hopping to obtain the LEDs reference and... They refused to tell me 🙄...
              10-08-2024, 11:58 AM
            • linuxrunner
              generic diffuser?
              by linuxrunner
              i have a 65" samsung UN65TU700DFXZA. my kid sprayed cooking oil from a spray/mist bottle onto the screen (2yr old thinking she was cleaning). oil ran down and seeped under the bezel on the bottom of the screen. It appears to have soaked/wicked into the diffuser i have a light colored splotch along the bottom of the screen that grew upwards over a day or two.

              i have not disassembled yet but judging by the way it wicked up it looks like its been absorbed into the diffuser so i don't have a lot of hope of cleaning it.

              i checked Samsung parts site but they don't...
              08-26-2022, 10:52 AM
            • THE GTC
              Insignia NS-37D20SNA14 intermittent LEDs
              by THE GTC
              So I use this TV daily as a second monitor for my PC or my Playstation - at one point a few months back I tried to fix the problem - but in the process, I figured out something that works so I haven't posted this for awhile. It is an annoying trick to have to do though, so I decided to post about it to see if anyone could spot what's wrong. It baffles me because it works on it's own half the time.

              When I first got this TV, I was told it wouldn't turn on, and of course I did the flashlight test, and the image was there. Also, the red LED on the front indicated that it had power (it...
              11-03-2020, 02:40 AM
            • Loading...
            • No more items.
            Working...