Sanyo 30744 HDMI Port Issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • KTMLew
    Member
    • Sep 2011
    • 37
    #1

    Sanyo 30744 HDMI Port Issue

    Have a weird one. Just picked this TV up off CL a month or so ago.

    If I watch Netflix on HDMI setting, no sound until I cycle the TV on/off. Then when I try to change back to TV "input", it won't change until I cycle TV on/off?

    Netflix is through an el-cheapo Magnavox DVD player.

    WTF?
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • aliougm
      Marantz SR4003 AVR HDMI board issue, seeking for help
      by aliougm
      I have problem with my AVR(Marantz SR4003) HDMI board issue. I connect to my TV but screen color distorted,see attached picture.

      Connection as below:
      Set-top box HDMI output >AVR 3 HDMI input/one HDMI output>HDTV HDMI port
      If I bypassed AVR then HDTV screen color be good.

      I take out HDMI board from AVR and check services manual the schematic shown the HDMI signals path:
      3 HDMI input port > SIL9185 chip(HDMI switch) > SIL9033 chip(HDMI receiver) > SIL9030 chip(HDMI transmitter) > HDMI output port

      I replaced all...
      04-30-2022, 12:21 PM
    • ratdude747
      Intel HDMI Windows 10 issue
      by ratdude747
      Got my butt kicked by windows 10 and intel last week.

      I have an HDMI switch and splitter setup for an AV rig (church) that I was trying to use the windows 10 half of my Lenovo T440s with. However, the audio will not work; HDMI (displayport) audio doesn't show in device manager and Intel's Control Center shows the external display as not supporting audio. Direct connect it to things and (if memory serves) it does work.

      Compounding the issue is that I'm forced to use Lenovo's drivers... as the generic intel ones refuse to install as they detect it's a lenovo system...
      12-04-2022, 07:34 AM
    • sebulica
      Asus FX705DT eDP and HDMI output issue
      by sebulica
      Hi

      I have an Asus FX705DT that had waterdamage....a lot

      I have managed to make the motherboard look like working but i stil have some issues and maybe someone can point me in the right direction.

      The laptop has a destroyed keyboard and the display is dead but i have managed to make the board start up and work "normal"...i have no short,power rails are looking good,hdd/ssd activity and so on.

      The problem is that there is no HDMI output,only sometimes makes the tv/monitor go black screen for a brief moment,and on the internal...
      04-06-2023, 04:44 AM
    • Ado02
      Dell Latitude 5510 USB-c Hdmi Issue
      by Ado02
      Hi,

      I am working on a Dell Latitude 5510 - the USB-c port has not HDMI output. The port works for data transfer and charging but not for HDMI.

      I check the USB-c port but can't see any damage.

      Has anyone experienced this problem and found a solution?
      04-05-2023, 02:55 AM
    • rounin
      MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
      by rounin
      Hi everyone,

      I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

      🛠 Original Issue
      The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
      Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

      I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

      ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
      04-19-2025, 01:18 AM
    • Loading...
    • No more items.
    Working...