Sanyo CE32FD90-B Good advert to quit smoking

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fruitbat04
    Senior Member
    • May 2014
    • 50
    • UK

    #1

    Sanyo CE32FD90-B Good advert to quit smoking

    Sorry if this is a bit off topic, but I thought some people might be interested.

    Just picked up the above TV as non working. Backlight comes on but no output. Basically just cleaning and reseating the LVDS cable has fixed it.

    I think it was caused by being in a heavy smoking household as there is what I presume is old tobacco (light brown dust/powder) all over the place and it stinks.

    The worst of what I've found (and also I assuming from smoking) is this bit under the bezel





    Glad I gave it up 5 years ago!
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30930
    • Albion

    #2
    Re: Sanyo CE32FD90-B Good advert to quit smoking

    looks more like rust - was it in a kitchen?

    Comment

    • R_J
      Badcaps Legend
      • Jun 2012
      • 9515
      • Canada

      #3
      Re: Sanyo CE32FD90-B Good advert to quit smoking

      Looks like rust to me too, from cleaning the screen and the liquid running down and collecting on the tin. lucky it did'nt wick up and ruin the lcd panel.

      Comment

      • fruitbat04
        Senior Member
        • May 2014
        • 50
        • UK

        #4
        Re: Sanyo CE32FD90-B Good advert to quit smoking

        Yeah you're right. It was tobacco all on the boards, but that part is rust. Coming off nicely with a dremel.

        It's not 100% though as it seems to have a tab bond problem as well. Not sure if it could have been caused by that, but hopefully a shim will help after it's all cleaned up.

        Not a pleasant fix this one...

        Comment

        • fruitbat04
          Senior Member
          • May 2014
          • 50
          • UK

          #5
          Re: Sanyo CE32FD90-B Good advert to quit smoking

          It's a rebadged Vestel as well this model.

          Comment

          Related Topics

          Collapse

          • irepair559
            Ps4 1215a hdmi diode readings good everything good but no pic??
            by irepair559
            PS4 1215A HDMI DIODE READINGS GOOD EVERYTHING GOOD BUT NO PIC? everything is good! what else can it be? if hdmi diode values are good that means encoder and filters are good right? idk what else it can be guys...
            01-05-2023, 12:32 AM
          • Mgiffune
            Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
            by Mgiffune
            I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

            I ordered a supposedly ‘new' Tcon board this time, and
            ...
            06-09-2024, 10:28 AM
          • the_rem
            Unknown transformer : how to find a good replacement part ?
            by the_rem
            Hello guys,

            I would like a quite old but still good 800 W ATX PSU to be repaired. The problem was an extremely heavy coil whine coming from the small secondary transfomer on the PCB.

            I desoldered it hoping the references on the upper side would allow me to find a adequate replacement part. Sadly the written references drove me nowhere but to the manufacturer (I-MAG). I sent them a message like a bottle in the see asking them to send me a datasheet of the transformer. And... They responded ! I received a kind of datasheet (see attachment) but my competencies do not allow...
            04-23-2025, 01:48 AM
          • cook
            Good brands of run capacitor for house heat hump
            by cook
            Are there good brands for 'run capacitors' or 'start capacitors' that are used on electric motors or heat pump compressors? ... r are the good capacitor brands for electronics (power supplies, laptops, motherboards, etc.) also the good brands for run capacitors?
            Yeah I know this might be a novice question, but I just wanted to be sure. I did do a search on the forum but did not see this question asked before.

            Thanks
            09-13-2024, 12:53 PM
          • spleenharvester
            Good power bank shells for 18650 cells?
            by spleenharvester
            I did a cell salvage run on some Dyson batteries to build out a new fleet of Milwaukee batteries and the yield was a lot higher than expected, so I now have a lot of extra Sony VTC4s that are in reasonably good health. I'd like to build them into power banks, there's a glut of shells for 18650s on AliExpress but I don't know which are any good (read: won't explode). Can anyone recommend some (especially the ones that just fit a single cell)? Weld or weldless are fine, I have a spot welder

            I suppose USB-PD and/or quick charge would be desirable too

            Cheers
            05-11-2025, 01:47 PM
          • Loading...
          • No more items.
          Working...