Announcement

Collapse
No announcement yet.

evesham v32eccb no power

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: evesham v32eccb no power

    And yet china copy everything else lol

    Comment


      #22
      Re: evesham v32eccb no power

      Very limited copyright enforcement in China, too much corruption. That business employs people from the city I'm mayor of/judge of/have friends of? That company is paying me? Dismiss the lawsuit. etc.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment


        #23
        Re: evesham v32eccb no power

        Did anyone ever find a schematic or a parts list? I'm working on one that has an open D9. It's a surface mount diode near IC 5. The body style looks more like a resistor than a diode, totally flat but has the white cathode stripe on it. Not sure if it's a regular diode, shottky, or a zener.

        Comment


          #24
          Re: evesham v32eccb no power

          This is old thread, please attach good clear high res straight shots pictures of the whole top and bottom side of your board, and closed up pictures around the part in question.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment


            #25
            Re: evesham v32eccb no power

            Does anyone have a schematic, BOM, parts list, etc. for these? I work at a casino and we use these on a Tatung 32" monitor in a Bally machine. There are some unidentified surface mount diodes used in locations D2, D3, D9, and other locations that are bad. I combined the diodes from both boards to have all good ones on one board, replaced MosFets Q2, Q3, U5 controller IC. No other obviously bad/shorted parts but it keeps blowing the Mosfets and U5 as soon as it is powered up. Also U5 was hard to get off of the board with a large amount of glue under it and it tore the board slightly. All traces appear to be intact but I want to verify on a schematic that every connection is where it needs to be. These are EOL, no longer available, so I'm trying to salvage these to keep our games running. Any info would be most appreciated! Thanks

            Comment


              #26
              Re: evesham v32eccb no power

              Casino gambling IS the problem, will NOT help perpetuate it in any way. Sure it's a choice but it's also psychologically addictive. That's why so many old people forgo their medication to spend their social security check at a casino and why so many young people are homeless because they spent their rent money AND all the other disgusting problems it causes. If I were elected king of the world, casinos would be the first to be GONE FOREVER.

              Comment

              Working...
              X