Sony KDL 52w5500 13 blink then 14 blink

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • goulloux
    Senior Member
    • Mar 2014
    • 52
    • goulloux

    #1

    Sony KDL 52w5500 13 blink then 14 blink

    Hi, I've a sony KDL 52w5500 since january 2010
    Yesterday it stoped working, I'm getting no screen (not even a black image) but I got sound for few seconds (~10)
    Then the tv stop and the bottom led start to blink
    First 13 times
    Then 14 times
    An other point is that I've check in the dark, and it seems that there is no light at all coming from the TV so I guess that none of the back lights are powering up.

    Any help will be gladly appreciated
  • vlado64
    New Member
    • Mar 2008
    • 7

    #2
    Re: Sony KDL 52w5500 13 blink then 14 blink

    Error code 14. No function. Red LED flashes 14 times. Restore software using the recovery software

    Comment

    • goulloux
      Senior Member
      • Mar 2014
      • 52
      • goulloux

      #3
      Re: Sony KDL 52w5500 13 blink then 14 blink

      Can you do a restore sofware without any image on screen ?

      Comment

      • Dang
        Badcaps Veteran
        • Aug 2013
        • 440
        • UK

        #4
        Re: Sony KDL 52w5500 13 blink then 14 blink

        Hi, I've done this very process although my Sony KDL-40V5810 would show a power on light but nothing else, would show a response to the remote for a bout 5 seconds and then just jam until I turned it off. I had to install some software to Sony's own proprietary memory stick and remove a small back panel, this revealed a port where I could insert the memory stick; so within 5 seconds or so of turning it on it sprang to life. I was lucky to get the software, I bought the Tv with the fault and was given the software(he had got it from a friend in the trade), the guy did try to fix it him self but needed a Sony camera to format the memory stick which luckily I had and the rest was easy.

        I understand this software can be quite hard to come by so a good search maybe needed.
        Last edited by Dang; 03-23-2014, 01:37 AM.

        Comment

        • goulloux
          Senior Member
          • Mar 2014
          • 52
          • goulloux

          #5
          Re: Sony KDL 52w5500 13 blink then 14 blink

          Originally posted by vlado64
          Error code 14. No function. Red LED flashes 14 times. Restore software using the recovery software
          Thx Dan ... it feels like this road is not going to be easy ...

          vlado64 can you tell where did you get the informations about the 14 flashes == No function ?
          If you do have the service manual for the 52w5500 would it be possible to get it ?

          Thx in advance
          Last edited by goulloux; 03-23-2014, 05:59 AM.

          Comment

          Related Topics

          Collapse

          • EazyBone
            Sony 85x90CK 4 red blink
            by EazyBone
            So I got this Sony and purchased it working.. got it home and it was 4 blinks red. Seller actually refunded me thankfully. Now it's massive to take apart and I know 4 blink can be the panel sometimes but not always..

            But I found a method through other ways with grounding out the bl error pin on the LD driver board. Now the tv turns on and works.

            Pin is number 27. It was either remove the resistor right next to the solder pad or solder the pad to ground. I soldered the pad.

            Now what is this going to do to the tv? Is it just going to die shortly down the road?...
            07-18-2025, 12:53 PM
          • cheeky2
            Sony RB2G Chassis KDL-55W815B MAIN BOARD 2 Blink Error issue resolved! Happy days :)
            by cheeky2
            For anyone interested just repaired this Sony Main board TV that had a 2 blink error code, the chassis is a RB2G which is common to quite a few different Sony models. The Ceramic 10uF 25V X7R 1206 capacitor C9114 was shorted which took the smd 2A 0603 fuse out F9101. This was powering the Buck converter TPS54332 which caused no 5V output from it.
            See the attached picture of the locations of both components. I also attach the best service manual I found for this board for anyone else in a similar position of trying to repair this main board. It's not specific to the TV model however it gives...
            01-08-2024, 05:56 AM
          • Famo
            Sony KDL-52Z4500 6 Red LED Blink
            by Famo
            Hello badcaps forum.

            I have a Sony KDL-52Z4500 TV that needs a little trouble shooting. History of the TV: I bought it about 14 years ago. One year ago, I took it off the wall to move to another house. During the past year it sat in its original packaging - even with the thin film plastic bag/cover that it gets shipped in, cardboard box and all. Last week I unpacked it to mount it in the garage for my wife's gym that she has setup. Turned it on, set up a chormecast on it for her, and all was good for a week running like always (brownie points for me from the wife ).
            ...
            06-09-2023, 10:21 PM
          • Carlos#2003%
            Schematic de una Sony VAIO PCG-41217u, Sony VPCSB45FL (MBX-237), 1p-0117j01-a012 mbx-237.
            by Carlos#2003%
            Buenas mi nombre es carlos me uni al foro porque estoy buscando el schematic de una sony vaio pcg-41217u otras formas de escribirlo son 1p-0117j01-a012 mbx-237 numero de placa revision 1.2 o Sony VPCSB (MBX-237), en fin me gustaria y ayudaria un monton si alguien me puede dar dichi svhematic para hacer las mediciones de una laptop de la mencionada anteriormente(Sony VAIO PCG-41217U) con el fin de repararla dejo de funcionar solo prende el led de la bateria al pulsar el boton de power el disco empiesa a hacer ruido de actividad pero los leds del frontas no reflejan acividad y no enciende la pantalla....
            02-15-2024, 07:52 PM
          • EazyBone
            Sony XR-77A80J OLED 5 Blink
            by EazyBone
            Another eazybone post took on this OLED now.

            Symptoms. Hit power, white light shows briefly and then 5 blink red code. TCON issue per chart on first picture.

            I'm thinking I have a power board issue though, which is one of the options

            Now to check pin voltages from PSU to main and PSU to tcon

            Pic 2

            1 tcon on 12 -- 0v (when I hit power this goes to 3.1 stays for short time and back to zero)
            2 bl err -- 0.16
            3 evdd on --0
            4. Ac off det 3.187
            5 power on -- 3.362 BUT fluctuating randomly to 3.352
            6 stby...
            10-24-2023, 09:09 PM
          • Loading...
          • No more items.
          Working...