75pfl5604/f7 Main board replacement RGB issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • EazyBone
    Badcaps Legend
    • Jun 2023
    • 1306
    • United states

    #1

    75pfl5604/f7 Main board replacement RGB issue

    Hey y'all, got a 75pfl5604/f7 that was DOA and I diagnosed this to be a main board issue. There was no indicator light, etc etc.

    Ordered a new one (maybe used) from torres TV parts and installed it. Now the screen cycles the RGB colors only. Hit power and that's only thing that happens. Which is good/bad because it shows the panel/PSU/tcon are running well lol.

    Anyone know what the deal is and how to get it out of this loop??
    Attached Files
  • Diah
    Badcaps Legend
    • Feb 2013
    • 6346
    • Germany

    #2
    you may have defect LVDS pin contact.. inspect it under good loop

    Comment

    • EazyBone
      Badcaps Legend
      • Jun 2023
      • 1306
      • United states

      #3
      Originally posted by Diah
      you may have defect LVDS pin contact.. inspect it under good loop
      What does under good loop mean. But yes I will check and reseat all ribbons.

      Comment

      • EazyBone
        Badcaps Legend
        • Jun 2023
        • 1306
        • United states

        #4
        Originally posted by Diah
        you may have defect LVDS pin contact.. inspect it under good loop
        Interestingly enough this was the solution. For some reason I had to jam the thing in there, I took some needlenose and grabbed the ribbon as tight as I could and use a screwdriver to push in the ribbon and voila it was done.

        Also I'm just kidding lol, but it was not seated fully and did require a little maneuvering, thanks again diah

        Comment

        • Diah
          Badcaps Legend
          • Feb 2013
          • 6346
          • Germany

          #5
          Originally posted by EazyBone

          Interestingly enough this was the solution. For some reason I had to jam the thing in there, I took some needlenose and grabbed the ribbon as tight as I could and use a screwdriver to push in the ribbon and voila it was done.

          Also I'm just kidding lol, but it was not seated fully and did require a little maneuvering, thanks again diah
          well let explain this issue to whom read this threat,,
          in General the Issue of only RGB Pattern displaying on the screen... are 99% the LVDS between MB & T-CON or LVDS between MB & Panel in case tV had no external T-CON... the reason one or more of the Silver contact pins during Sitting get cut or lost connection... those PINs are for V, Signals P+ P- could be... so in this case the T-CON or Panel ( no t-con set ) will have only 12V .. so it will run in test of T-CON / Panel stand alone mode.
          second reason 1% and this less ,issue at the SPI on MB
          thanks for following.

          Comment

          Related Topics

          Collapse

          • Asraf Atb
            Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
            by Asraf Atb
            Hi everyone,

            Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

            Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

            I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
            01-27-2025, 05:02 PM
          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            11-22-2024, 01:46 PM
          • cheeky2
            Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
            by cheeky2
            I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
            Obviously the same LVDS connector for the screen connection...
            05-25-2024, 03:27 AM
          • cheeky2
            Sony RB2G Chassis KDL-55W815B MAIN BOARD 2 Blink Error issue resolved! Happy days :)
            by cheeky2
            For anyone interested just repaired this Sony Main board TV that had a 2 blink error code, the chassis is a RB2G which is common to quite a few different Sony models. The Ceramic 10uF 25V X7R 1206 capacitor C9114 was shorted which took the smd 2A 0603 fuse out F9101. This was powering the Buck converter TPS54332 which caused no 5V output from it.
            See the attached picture of the locations of both components. I also attach the best service manual I found for this board for anyone else in a similar position of trying to repair this main board. It's not specific to the TV model however it gives...
            01-08-2024, 05:56 AM
          • alltvrepairs
            Samsung UE65RU7090UXZT main board issue no video out. BN94-14180M
            by alltvrepairs
            Hi,

            I have confirmed that I have a mainboard problem.
            I have tracked no hardware issued on board so might be a software dump required.

            I have searched a bit but wasn't able to find anything for my screen:

            Here are some more details:
            Panel: cy-nn065hgev1h
            Main: BN94-14180M P08F

            Your help much appreciated!










            ...
            05-16-2025, 03:03 AM
          • Loading...
          • No more items.
          Working...