sanyo dp 26640 dead

[beeman]

i have a sanyo dp 26640 that wont power on there is power comming in i am learning as i go have fix 4 other tv but you could see the trouble , with my dmm i have the black lead to chasy ground red lead to power board or control board ground and stil get 10v???

[newtothis]

Re: sanyo dp 26640 dead

Ok start with some good clear pictures

[beeman]

Re: sanyo dp 26640 dead

ill try to post pic dont see how to atch pic

[selldoor]

Re: sanyo dp 26640 dead

Read last 2 posts here
https://www.badcaps.net/forum/showthread.php?t=1868

[beeman]

Re: sanyo dp 26640 dead

C:\Users\Gary\Pictures\2014-01-02

[beeman]

Re: sanyo dp 26640 dead

sorry to seem dunb the boiler form i am part of i dont have any truble sending pic just click attachment

[tom66]

Re: sanyo dp 26640 dead

We can't access files on your own computer, to add a file you need to go to below the place where you enter your message and click "Manage Attachments", then select the files by clicking "Browse..." and finally clicking Upload.

[selldoor]

Re: sanyo dp 26640 dead

Click on Post reply - do not use quick reply

Type "Pics added"

Scroll down to Additional Options
Second one is Manage Attachments
Click on that and a new window will open
Click on Browse and find the file you want to upload

It will then upload to the system and tell you when it has completed

You can then Preview post or Submit reply

[beeman]

Re: sanyo dp 26640 dead

sorry selldoor i tried what you said but it throws me of site and shuts down window then i have to start over resighn in and get back to were i was eny help would be great like on the "outdoor wood furnace info form "every body loves pic and are helpfull to helping others

[beeman]

Re: sanyo dp 26640 dead

would a shorted voltage regulater show power on the metel its atched to

[tom66]

Re: sanyo dp 26640 dead

That doesn't make sense, not sure what you mean? Usually a shorted regulator will get very hot, and there will be nearly 0V on each pin.

[selldoor]

Re: sanyo dp 26640 dead

I dont understand it seems to work for everyone else - even those who
barely speak English

Do you get to the screen shown in my pic attached
Is your pic a .jpg less than 2mb.

You cannot upload a file of say 5 pictures on one line you have to do a separate line for each.

[beeman]

Re: sanyo dp 26640 dead

just trying to maltytask when trying to fig out pic when i click on manage the box comes up blank but then application error box comes up saying memory could not be read then it nocks me off and i have to start windows then resighn in the power board i have is a 1lg4b1oyo470a trying to up load one from the net to help tou help me i do get power across the board until it gets to the transformer sorry for being a pain in your but

[tom66]

Re: sanyo dp 26640 dead

You have a fault with your computer or application software. Are you using Internet Explorer, Firefox, Chrome or another program?

[selldoor]

Re: sanyo dp 26640 dead

This bit is a test insert - dont think it works


I will put the same pic as attachment



I too think you have a fault on your PC - I have been reading - perhaps something to do with a Nividia driver update?


EDIT - No that didnt work

[tom66]

Re: sanyo dp 26640 dead

"Memory could not be read" is a general critical Windows error (application abort) relating to an application attempting to read memory out of range. May or may not be related to Nvidia drivers or anything else.

[beeman]

Re: sanyo dp 26640 dead

i have google not the chrome