le40r87db screen but no picture

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wreksta
    Badcaps Veteran
    • Aug 2013
    • 508
    • england
    #1

    le40r87db screen but no picture

    hi all got a Samsung in it was a clicker so replaced both the psu and mainboard
    even tried a tcon board in it the same one lads
    but still no picture screen lights up no menu no nothing

    could this still be a powedr issue will do usual checks soon just throwing this one out there see if anyone has any ideas
    Tags: None
    • wreksta
      Badcaps Veteran
      • Aug 2013
      • 508
      • england
      #2
      Re: le40r87db screen but no picture

      Any help here this one got me head battered just come across another thread simliar problem going to do what tom says and test the components on lower side of both the t-cons

      i just replaced main and psu

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA
          #3
          Re: le40r87db screen but no picture

          Check the DC voltage on both ends of the fuse on the T-CON with ref to Chassis ground?
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Mgiffune
              Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
              by Mgiffune
              I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

              I ordered a supposedly ‘new' Tcon board this time, and              ...
              06-09-2024, 10:28 AM
            • Ryan.man
              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
              by Ryan.man
              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
              02-04-2025, 12:23 PM
            • arbitarytwist
              Samsung UN50NU7400 - No Picture (but boot screen and screensaver)
              by arbitarytwist
              Have a Samsung UN50NU7400 which shows a boot screen and a screen saver if left on long enough but no picture ?

              Would a moving screen saver confirm that the panel is ok or it could still be a panel issue ?
              03-01-2025, 01:16 PM
            • reformatt
              Macbook Air M2 A2681 Kernel panics after screen replacement
              by reformatt
              Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

              It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
              07-31-2025, 08:37 PM
            • nasdaa
              Packard Bell Kayfo, no picture on screen.
              by nasdaa
              Hello, I need your help for a failure on a laptop:

              It's a Packard Bell Kayf0, motherboard LA-5021P, Rev 1.0 with graphic issue.

              I received this pc because it was turning on but not displaying anything, the fans are running normally and all chipsets heat up on startup but no picture on screen, no backlight either. I noticed that ENAVDD and ENVDD are not present and that there is no LCDVDD on the connector. I didn't check the screen because, maybe I'm wrong, but if there aren't these signals, even if the screen is good, it can't display anything? I tried heating the...
              06-20-2023, 01:27 AM
            • Loading...
            • No more items.
            Working...