Re: Vizio P50HDTV10A Sound No Pix
Hers a pix of the board for reference.
Hers a pix of the board for reference.
Attached Files
-
If it ain,t broke.......
If all the smoke is still in it, it should work, -
Re: Vizio P50HDTV10A Sound No Pix
Should have attached this one too.Attached FilesIf it ain,t broke.......
If all the smoke is still in it, it should work,Comment
-
-
Re: Vizio P50HDTV10A Sound No Pix
Is a complete picture frame loaded and then strobed/sustained by the Ysus at a time or is each Line loaded and strobed in sequence, top To bottom?
I know you guys and Gals don,t have a magic wand and I appreciate all the input, I have actually learned quite a bit but barely scratched the surface.
Actually considering raiding my main, the P50HDTV20 to try and make sense out of this 10. Not really thinking thats a wise move, most boards won,t be compatable, except maybe the one I already relaced.
Might be better off to just re skin it and wait for another 10, in the mean time I just pick on it a little when I get a wild hair.
Regards
DavidIf it ain,t broke.......
If all the smoke is still in it, it should work,Comment
-
Re: Vizio P50HDTV10A Sound No Pix
Is a complete picture frame loaded and then strobed/sustained by the Ysus at a time or is each Line loaded and strobed in sequence, top To bottom?
I know you guys and Gals don,t have a magic wand and I appreciate all the input, I have actually learned quite a bit but barely scratched the surface.
Actually considering raiding my main, the P50HDTV20 to try and make sense out of this 10. Not really thinking thats a wise move, most boards won,t be compatable, except maybe the one I already relaced.
Might be better off to just re skin it and wait for another 10, in the mean time I just pick on it a little when I get a wild hair.
Regards
DavidIf it ain,t broke.......
If all the smoke is still in it, it should work,Comment
-
Re: Vizio P50HDTV10A Sound No Pix
Unless your two TVs' main boards have the same part number, I wouldn't swap the main boards. I still might be a bit nervous about taking the main board out of a working TV. You can check shopjimmy.com for compatibility.Comment
-
Re: Vizio P50HDTV10A Sound No Pix
Thanks Cap Kid, I,ll check that out.If it ain,t broke.......
If all the smoke is still in it, it should work,Comment
-
so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!!
what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol! 
i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing... -
Hi I inherited a Vizio M65-E0 that isn't working. It must have been dropped on the corner because I found that the infrared circuit had a capacitor with one end broken off of the board and some green corrosion around the plug to the main board. I re-soldered the capacitor and cleaned the corrosion well and tried turning the M65-E0 on and I was successful. My problem is that while the back lights come on and appear to perform local dimming there is no picture or sound. It kind of looks like you are looking at the TV through a very dense fog, where changing the input on the remote will change bright... -
Good day ladies and gentleman!
I am currently trying to repair a Grundig Vision 9 37 9880 T USB LCD TV for a friend that has a weird audio problem. Basically everything works fine except for the heavily distorted sound when the Subwoofer module is connected and there is a buzzing sound coming from the PSU PCB.
This seems to be a rather rare TV so there is not much prior on topic help to be found however a service manual is available at the usual sources (Electro Tanya i.e.).
I think the PSU buzzing comes from one of the coils near the bridge rectifier but... -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Have a free Vizio E60-E3 pickup - sound and backlights work. set turns on and stays on for a period then cycles off and back on. NO VIDEO. If I remove left side (from front of TV) of TCON cable - set has pic on right side (from front of TV) with white screen on left side. With right side TCON cable disconnected - no pic on either side.
Does this mean remove right side (from front of TV) tabs ?
Like a second opinion before possibly destroying set....
Comment