Is a complete picture frame loaded and then strobed/sustained by the Ysus at a time or is each Line loaded and strobed in sequence, top To bottom?
I know you guys and Gals don,t have a magic wand and I appreciate all the input, I have actually learned quite a bit but barely scratched the surface.
Actually considering raiding my main, the P50HDTV20 to try and make sense out of this 10. Not really thinking thats a wise move, most boards won,t be compatable, except maybe the one I already relaced.
Might be better off to just re skin it and wait for another 10, in the mean time I just pick on it a little when I get a wild hair.
Regards
David
If it ain,t broke.......
If all the smoke is still in it, it should work,
Is a complete picture frame loaded and then strobed/sustained by the Ysus at a time or is each Line loaded and strobed in sequence, top To bottom?
I know you guys and Gals don,t have a magic wand and I appreciate all the input, I have actually learned quite a bit but barely scratched the surface.
Actually considering raiding my main, the P50HDTV20 to try and make sense out of this 10. Not really thinking thats a wise move, most boards won,t be compatable, except maybe the one I already relaced.
Might be better off to just re skin it and wait for another 10, in the mean time I just pick on it a little when I get a wild hair.
Regards
David
If it ain,t broke.......
If all the smoke is still in it, it should work,
Unless your two TVs' main boards have the same part number, I wouldn't swap the main boards. I still might be a bit nervous about taking the main board out of a working TV. You can check shopjimmy.com for compatibility.
Comment