Vizio Va320M turns on to vizio logo screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • vizio54
    New Member
    • Jun 2013
    • 8
    • los angeles
    #1

    Vizio Va320M turns on to vizio logo screen

    Turns on to logo screen and wont change
    I've done a soft boot with the power button
    the only fuse i could find checked out ok
    Unplugged over night
    Pushed and held the power button while plugging it in and no change
    I've checked all the power connecters
    I've attached a couple pictures




    Attached Files
    Tags: None
    • aaronwt6
      Badcaps Veteran
      • Apr 2013
      • 855
      • US
      #2
      Re: Vizio Va320M turns on to vizio logo screen

      Sounds like a corrupt / bad eeprom from a couple that I've dealt with recently with similar symptoms. You can but a pre-flashed chip to replace it if you're good with soldering or just swap the whole main board.

        Comment

        • vizio54
          New Member
          • Jun 2013
          • 8
          • los angeles
          #3
          Re: Vizio Va320M turns on to vizio logo screen

          i have been looking into an eeprom using my model number and haven't found one for VA320M.

            Comment

            • aaronwt6
              Badcaps Veteran
              • Apr 2013
              • 855
              • US
              #4
              Re: Vizio Va320M turns on to vizio logo screen

              I believe your TV model is M320VA and not how you have it listed. Let me know if that is correct. Message this guy on ebay. I got one for another model from him that he didn't have listed. Also, search Ebay for vizio main boar repair. There are people that offer eeprom swap service on many models.

              http://www.ebay.com/itm/Vizio-E420VA...item20d34b923e

                Comment

                • vizio54
                  New Member
                  • Jun 2013
                  • 8
                  • los angeles
                  #5
                  Re: Vizio Va320M turns on to vizio logo screen

                  it is VA320M LCD HDTV i still have the book that come with it and verified the model number on the back of the unit

                    Comment

                    • pizo
                      New Member
                      • Aug 2014
                      • 7
                      • usa
                      #6
                      Re: Vizio Va320M turns on to vizio logo screen

                      Hi guys,
                      I have the same problem with my tv .(Vizio VA320M Turn on to logo screen and won't change)
                      Did you find the problem? Any of you guys had that issue before?

                      Thank's.
                      Last edited by pizo; 08-11-2014, 06:59 AM.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • smic717394
                          iphone XS turns off when press on screen.
                          by smic717394
                          Hi,

                          I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                          07-25-2024, 10:16 AM
                        • Super360
                          Vizio E701i-A3 Vizio logo flashing then turns off
                          by Super360
                          Ok so here's the story. I was watching tv one day when all of a sudden I heard a pop from the back of the tv set and rushed to unplug the set. By this time the tv already had smoke coming out the back. It was not storming or inclement weather that day to cause a power surge to the best of my abilities. When I opened the tv up, I found that the three capacitors on the psu (highlighted in red) were all bulging and looked they had exploded. I replaced all of them right away and when I went to start up the tv after the "fix" it started just showing the flashing vizio logo as soon as power...
                          07-25-2024, 07:06 PM
                        • spice_disc
                          Vizio TV M50-C1 reboot cycle and static on screen
                          by spice_disc
                          I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                          The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                          1 Photo
                          09-08-2024, 02:37 PM
                        • Ryan.man
                          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                          by Ryan.man
                          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                          02-04-2025, 12:23 PM
                        • abajor
                          A2141 Screen replacement. Boots screen freezes on Apple Logo 1/3 status bar unless connected to second monitor.
                          by abajor
                          Having this very weird issue.
                          The owner of this laptop complained about screen being intermittent when opening and closing, and has been using the laptop on a thunderbolt video connection since the screen failed.

                          I swapped with a working screen from an A2141 waiting for parts.

                          The Os exhibits this weird behavior where it boots to to 1/3 the status bar, then it makes the boop sound. It's at the log in but for whatever reason the desktop isn't loaded.

                          The laptop boots fine into recovery mode. I updated from Monterey to Sonoma and the laptop still has...
                          04-27-2024, 01:37 PM
                        • Loading...
                        • No more items.
                        Working...