Sanyo dp46819 left side screen black

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • superdad2013
    New Member
    • Mar 2013
    • 8
    • usa

    #1

    Sanyo dp46819 left side screen black

    hi all I have a Sanyo dp46819 lcd and the left side if the picture is black....the backlight is good and when I touch the panel u see the liquid like The good side.. the line runs right through middle of screen and from middle to left up and down its all black...when its on a black background I can see the left side is a tad darker.. would like to fix it.. please help..
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

  • superdad2013
    New Member
    • Mar 2013
    • 8
    • usa

    #2
    Re: Sanyo dp46819 left side screen black

    another pic.
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Comment

    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA

      #3
      Re: Sanyo dp46819 left side screen black

      There should be two flat white cable between the T-CON and the LCD PANEL, it looks like the left side cable may not be connected or the drive for that side is dead. See post 10 for the pictures of typical flat white ribbon cables.
      https://www.badcaps.net/forum/showth...ight=LG+47LH55

      Did it happen all the suddenly?
      Last edited by budm; 06-08-2013, 11:59 PM.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Sanyo dp46819 left side screen black

        Tab bond defect
        https://www.youtube.com/watch?v=purk_SyiT44

        (Same cause - symptoms vary from no picture in affected half to scrambled/unstable picture or vertical lines.)
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • Irishblood
          New Member
          • Mar 2015
          • 1
          • USA

          #5
          Re: Sanyo dp46819 left side screen black

          Need help with this too. Don't have any technical knowledge and wondering if it's worth fixing

          Comment

          Related Topics

          Collapse

          • ravi_1617
            HCL Laptop SCREEN SIZE SHRINK LEFT SIDE AROUND 2 INCHES
            by ravi_1617
            Hello to all ,
            I have this HCL ME LAPTOP K 41 ,screen image is shrieked clock /speaker left side approx. 2 inches .Its 14.1 LCD SCREEN. I have replaced lcd screen ,found no difference
            Its blank that area blank and bottom of Task bar is rolled at bottom displaying top portion image . In bios /setup also getting same problem
            on external VGA port image is perfect /normal , Attached image...
            07-25-2025, 12:07 AM
          • valvashon
            Samsung UN60JU6500, stripe on left side of screen
            by valvashon
            Friend sent me this picture of what their 60" Samsung from 2015 is doing. I didn't have any luck getting rid of a vertical stripe in another TV that developed one so I'm not too excited about trying to fix this one. It's mine for the asking; wish it had a dead power supply or bad backlights instead.

            Is this most likely to be a connection at the circuit board or where the ribbon cable hits the screen itself?

            Update: was just informed that this stripe comes and goes and has been doing this for a couple of months.

            Thanks, Val



            ...
            Today, 03:01 PM
          • kca
            LG 82UN8570AUD ~ TCON or PANEL?
            by kca
            Hello all ~

            Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

            When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

            I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
            08-31-2025, 06:38 AM
          • Ryan.man
            Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
            by Ryan.man
            Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

            My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

            This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
            02-04-2025, 12:23 PM
          • howardc64
            A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
            by howardc64
            Problem

            This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
            08-04-2024, 10:36 PM
          • Loading...
          • No more items.
          Working...