Announcement

Collapse
No announcement yet.

Baird X37DTV stobe Backlight issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Baird X37DTV stobe Backlight issue

    hi guys im a newbie on this, had luck of repairing tvs up till my last recent few tvs... this one is a Baird X37DTV (rather sh*t make) but prefer it not going to the Dump like i see so many people do. the problem is when tv is switched on itjust flashes like a strobe, tried changing the invertor to the exact same one and has not fixed the problem, changed a Bulging cap on the poer board, still didnt do the trick > any ideas guys ??

    #2
    Re: Baird X37DTV stobe Backlight issue

    Primary capacitor can often fail on PSU which can cause rapid strobing.
    How about pictures of the boards?
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      #3
      Re: Baird X37DTV stobe Backlight issue

      ok give me 5 minutes i will pop open the tv and take some pictures.

      Comment


        #4
        Re: Baird X37DTV stobe Backlight issue

        hope this helps mate
        Attached Files

        Comment


          #5
          Re: Baird X37DTV stobe Backlight issue

          Can you remove the metal shields on the power supply so we can see underneath them?
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment


            #6
            Re: Baird X37DTV stobe Backlight issue

            yeah mate no problem, couple of minutes cheers

            Comment


              #7
              Re: Baird X37DTV stobe Backlight issue

              hope these help. think thats thermal paste that was bonding the metal sheets to the top of PSU components
              Attached Files

              Comment


                #8
                Re: Baird X37DTV stobe Backlight issue

                It looks like the end of that large capacitor has one lead pushed out, which indicates it is failed.
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment


                  #9
                  Re: Baird X37DTV stobe Backlight issue

                  can i repair ?

                  Comment


                    #10
                    Re: Baird X37DTV stobe Backlight issue

                    It can be replaced. Can you get a picture facing the leads?
                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment


                      #11
                      Re: Baird X37DTV stobe Backlight issue

                      by leads do you mean the two metal bits going into the Cap ? sorry if im wrong, bit new to all this, susualy just replace boards but getting too expensive, thanks for all your help mate

                      Comment


                        #12
                        Re: Baird X37DTV stobe Backlight issue

                        Yep, those are the leads.
                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment


                          #13
                          Re: Baird X37DTV stobe Backlight issue

                          sorry about all the dust, need to get it all cleaned.
                          Attached Files

                          Comment


                            #14
                            Re: Baird X37DTV stobe Backlight issue

                            Huh. I thought I saw the lead bulging out. I don't know if it is faulty. How often does it flicker? i.e. 10 times a second, one a second, etc...
                            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                            Comment


                              #15
                              Re: Baird X37DTV stobe Backlight issue

                              around 5, just goes like a strobe.. can upload a video if any help ?

                              Comment


                                #16
                                Re: Baird X37DTV stobe Backlight issue

                                see if this is any help mate, forgot to mention after 10 minutes or so the tv backlight stays on solid.. just flashes like hell till then

                                http://www.youtube.com/watch?v=H7LhU...ature=youtu.be

                                Comment


                                  #17
                                  Re: Baird X37DTV stobe Backlight issue

                                  OK, in which case, do you have a hairdryer?
                                  Heat up the capacitor we have discussed previously. See if it begins to stop flickering.
                                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                  Comment


                                    #18
                                    Re: Baird X37DTV stobe Backlight issue

                                    ok mate will try that tomorrow and get back to you , not got a hairdryer lol

                                    Comment


                                      #19
                                      Re: Baird X37DTV stobe Backlight issue

                                      Any kind of heat source works.
                                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                      Comment


                                        #20
                                        Re: Baird X37DTV stobe Backlight issue

                                        ok mate think i have a small heat gun kicking around will have a hunt for it n post results hopefully tonight

                                        Comment

                                        Working...
                                        X