just no clue, have been looking for awile fig i would give a try and see if anyone can help me. Vizio42'' fhdtv10a. part is from power board.
Announcement
Collapse
No announcement yet.
need help finding and identify
Collapse
X
-
Re: need help finding and identify
http://www.digikey.com/scripts/DkSea...=0&y=0&cur=USD
That's for the part number that was on the mosfet in pic #4
-
Re: need help finding and identify
Be sure to check the Gate drive components and the output pin of the IC that drives this MOSFET, otherwise if the output stuck high instead of switching ON/OFF it will take out your new MOSFET. Also check the Source pin resistor.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
Comment
Comment