Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
i will order one tonigt ,, i have a few power boards from samsung but the boards are good,,,,i would hate to rob a part off a perfect board!! i may as well order a few other parts while i`m doing that . where would be a good place to order that ??
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Choose one which matches the dimensions most closely.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
a film capacitor.....i will call them that way i get the right ones i will replace both of them i believe!! i hope it gets it fixed , or atleast point us in the right direction !! thanks tom for your help .
i do know where another board is if all else fails,,,,,but the rev number is different. so i dont know if that would cause prolbems or what ?? i want to try to get this board solved that way i dont get a fortune wraped up in this board or this set !!
well i got the parts ordered. one was on backorder 6-8 wks so i ordered o ne that was close to it, the prongs on the bottom was a little longer ,,will try to make it work!!! i did see on another site that had this same kind of prolbem, after the part was replaced the tv worked! guess we will wait and see! i ordered them from mouser . the parts were 80-phe450sd5560jr6l2 the other 80-phe450sd5330jr6l2
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
well i got the 2 blue boxes in today,,,one that is replacing the buldged one is on backorder so i got one thats the same ,, but just a bit longer try to see if it will work or not,,,hope so!! if not i will have to wait 3-8 weeks
Why did you order one out of stock? There were more than 10 that were in stock...
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
I gave you a list at digikey and told you to pick one which fitted the dimensions of the original... what was wrong with that...
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment