Phillips 6632L-0470A Master Inverter need SMT Resistor MR83

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • high-tech
    Senior Member
    • Sep 2010
    • 197
    • USA
    #1

    Phillips 6632L-0470A Master Inverter need SMT Resistor MR83

    Hi all, I need a resistor, I don't know the value. maybe you can help me. Look @ the pictures , I put a red diamond around the location of the mr83 resistor...

    Thanks for your help!
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Last edited by high-tech; 12-30-2012, 02:52 PM.
    Tags: None
    • mu2
      Badcaps Veteran
      • Oct 2009
      • 217
      #2
      Re: Phillips 6632L-0470A Master Inverter need SMT Resistor MR83

      I just looked at a board that I have.
      It is a rev 1.2
      Part M83 is marked "102"

      Mike

        Comment

        • mu2
          Badcaps Veteran
          • Oct 2009
          • 217
          #3
          Re: Phillips 6632L-0470A Master Inverter need SMT Resistor MR83

          Sorry, I meant part MR83!

          Mike

            Comment

            • selldoor
              Slow Learner
              • Dec 2010
              • 7870
              #4
              Re: Phillips 6632L-0470A Master Inverter need SMT Resistor MR83

              102 = 10 x 10Squared(100) = 1000Ω or 1kΩ
              Last edited by selldoor; 12-30-2012, 04:01 PM. Reason: Doesnt support halfsize small numbers
              Please upload pictures using attachment function when ask for help on the repair
              http://www.badcaps.net/forum/showthread.php?t=39740

                Comment

                • high-tech
                  Senior Member
                  • Sep 2010
                  • 197
                  • USA
                  #5
                  Re: Phillips 6632L-0470A Master Inverter need SMT Resistor MR83

                  Thanks, I have a donor so when the repair kits get here I will have a good set of boards for a 42" LCD!

                  Mine are revision 1.2 as well.
                  Last edited by high-tech; 01-01-2013, 03:05 PM.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • cheeky2
                      Help with bypassing the OZ9928SN inverter ic from I470H1-20A MASTER LG 47LG5000
                      by cheeky2
                      Merry Christmas
                      Does anyone know how to bypass the protection ic OZ9928SN on a LG 47LG5000 inverter using a I470H1-20A MASTER pcb?
                      Pictures attached
                      Thanks in advance...
                      12-26-2024, 05:25 AM
                    • jinu_j
                      Dell 2209WA - power supply - Fusible Resistor replacement
                      by jinu_j
                      Hi

                      I am trying to repair an ancient Dell 2209WA Monitor which suddenly shut off with a pop sound. On investigation found that one of the fusible resistors had blown. Further investigation identified multiple components as faulty because of which the fusible resistor blew. Please refer the attached circuit diagram showing the components that were found to be damaged.

                      1. FR950 - blown fusible resistor - 0.2 Ohm 1W
                      2. Q950 - shorted Q950 MOSFET - 650V 10A N Channel Mosfet
                      3. R835 - Blown Resistor - 20KOhm SMD resistor
                      4. D930 - Shorted Schottkey Diode...
                      05-03-2025, 10:51 PM
                    • mikey5791
                      Need help to replace burned resistor in 350w atx psu
                      by mikey5791
                      Hi to all forum members,

                      Got this faulty 350 watt atx psu dirt cheap from a local online seller as i am keen to use it as a learning tool to repair faulty power supply.
                      The faulty part is quite obvious from the burn area near the 16pin KA7500 BD pwm. The fuse is still intact with good continuity.

                      Upon power on ac, there is 5vdc standby power on cathode of diode D14 and about 10vdc on cathode of diode D13.(This should be the aux power to generate the 12v and 5v rail.)
                      Initially i replace the two burned resistors near my marked red arrow to 200 ohm resistor...
                      12-26-2024, 04:55 AM
                    • MidnightRoller
                      Can a resistor lose resistance after hot air?
                      by MidnightRoller
                      I am curious if a 0402 resistor could go from 43 ohm to 0. In electronics class and my experience a resistor can degrade and gain resistance all the way up to not being able to conduct at all. I have never heard of a resistor decreasing in resistance and becoming 0 ohm or a dead short… that's not the direction they fail… or so I thought.

                      I was attempting to remove a wson8 chip on an iMac motherboard and it required a lot of heat, on one side of the chip were 3 0402 resistors that were very close. I popped the chip out unintentionally out of the tweezers and sent those resistors...
                      02-02-2022, 11:46 PM
                    • artvandalai
                      What resistor ohm will work better to repair this waterpik?
                      by artvandalai
                      The resistor on this waterpik blew. I changed it with the a similar spec 47ohm 2 watt yageo resistor but it still keeps blowing the resistor. Checking with the multimeter the motor, capacitor, diodes, and thermal fuse all checked normal. Will a higher ohm resistor work better? What ohm resistor will work better to repair this waterpik? This video is showing the repair with a 56 ohm resistor https://www.youtube.com/watch?v=_J7_rV7ui1Y
                      3 Photos
                      01-05-2025, 04:10 PM
                    • Loading...
                    • No more items.
                    Working...