Re: Panasonic P50G20E
I can not get into this menu ,is this the info button
I can not get into this menu ,is this the info button
-
-
Re: Panasonic P50G20E
Yes, holding Volume DOWN on TV, then press that button three times, no luck?Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
and TV has no sound reduction ,Only through a combination of keys
It comes only in info
Comment
-
Re: Panasonic P50G20E
Can you try with the original board. I have a feeling something is wrong with the new board if it doesn't even recognise the side buttons.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
old board can not be ON
I'll wait a bitComment
-
Re: Panasonic P50G20E
I thought it worked but shut down with old board? I'm a little lost.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
Yes, if youON the old, works without problem, but now does not want
Last edited by Stanislav; 01-12-2013, 12:50 PM.Comment
-
Re: Panasonic P50G20E
I would seriously suggest you attempt to reflow the board as it appears to be a common defect with both Panasonic and Samsung TVs.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
Hello Tom
Please give me a reliable vendor for a new A Board, I still can not get my money back from the last Ebay seller.
If there is a reliable supplier of parts please tell me
Comment
-
Re: Panasonic P50G20E
I've used flattvparts before and no one else, because I've had good luck via eBay usually.
Raise a dispute on eBay and your money will usually be back in a few days.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
Hi Tom
I do not know what to do,just got board from flatparts and guess
100% broken board ,TV turns on and after 10 seconds starts blinking 11 times
Comment
-
Re: Panasonic P50G20E
11 blinks is FAN error, check the fan connectors are properly installed.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
Hi my friend
I'm not a fan in TVComment
-
Re: Panasonic P50G20E
No fans in this set at all? I thought Panasonic still used them in their sets?
SM:
http://www.tgohome.com/ServiceManual...&Search=Submit
Indeed, no fans...
I note there is no place for 11 blinks in this SM (i.e. no fan error), which means the board is most likely from a chassis which had fans in it, hence it is detecting fan error. Do you see any place where fan might connect? Was it from the same model? (Perhaps they removed the fans from the later versions...)
We may be able to trick it into thinking it has a fan.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
Yes board is to model with fan
I do not see where have been involved.
There are several plugs but they are quite different from fan receptacleComment
-
Re: Panasonic P50G20E
What model was it removed from, I can check SM for fan connector location (may be on PSU fed through PSU connector.)Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
second,I found it hidden is but I saw her
but to tell you I prefer to put fanComment
-
Re: Panasonic P50G20E
there is too warm and fan will be usefulComment
-
Re: Panasonic P50G20E
Installing a fan may be a good idea. You may be able to use a normal computer fan, or you can use the Panasonic original part, which people on eBay will probably sell.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Panasonic P50G20E
well, but we you can put a resistor for to work until I buy and fanComment
-
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow
This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board
After all of... -
I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.
The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.
I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was... -
All left and right refers to looking from rear of TV (or looking from front with TV upside down)- TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
- Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
-
Hi everyone!
I happened several times, in the search for help from the web, to consult this very interesting forum.
So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.
Having said that I come to the gist of my post on the forum as the title suggests.
For my passion for technology I'm now collecting several...
Comment