Today I got a TV Plasma LG PC3D-UE from a friend that missing one transistor location Q855. Any body knows the number of Q855, please help. Thanks a lot.
-
-
Re: TV LG Plasma 50PC3D-UE
You need to tell us if possible what board the missing transistor is on. A clear, detailed picture of the board showing the missing part location would be very helpful too.Last edited by randtek; 12-07-2012, 04:53 PM. -
Re: TV LG Plasma 50PC3D-UE
Sorry, I have no pic now. Power board location Q855Comment
-
Re: TV LG Plasma 50PC3D-UE
Is it definitely missing? Some manufacturers omit parts in certain builds or to reduce manufacturing cost.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: TV LG Plasma 50PC3D-UE
My friend gave this TV to me, he told me his friend tried to fix it but not success about two months then he brought it back and gave it me. He told me no power. I plugged it in power ac outlet, pressed power button it shut down in about 2 seconds. I suspected power supply board then I took the back cover off and unscrews power board and checked bottom of the board in case there are cold pins. I acknowledged that some body already tried to fix the TV and left three whole and a piece of insulator next to another transistor marked SD20N60. I`m looking for diagram for this power board also. Thanks for your replies.Comment
-
All Voltages are OK except ZSUS 15v.
YSUS board disconnected still 15v missing.
ZSUS was replaced: 15v missing.
Any help will be appreciated... -
Board had no history of liquid; unsure of drop history, but no signs of damage of any kind worth noting.
Charger sitting at 5v/0a. PPBUS is at 1.9v-0.9v steady cycle (peaks, drains, loops). Confirmed CHGR_EN_MVR is missing, but DCIN was reaching ISL just fine, so replaced ISL--no change at all. Confirmed pp3v8_aon is also missing--and being unsure *exactly* which signal appears first (or if they are simultaneous), I inspected PMU/U8100 area and found no shorts, but also found PP3V8_AON_MPMU_ISNS_VIN missing (not shorted). Replaced U8100 just in case (have had them fail in weird ways),... -
Hi everyone,
I recently acquired this card from a seller who was selling a PowerMac G5 for parts. He mentioned that the video card was probably broken too.
Upon closer inspection, I can tell the reason why it won't work: it's missing a bunch of CAPS! (it's also missing an inductor - 1.0uH).
It's a nice card as it's one of the few AGP cards that will support 2560 x 1600 resolution on a PowerMac G5 using a 30" Cinema Display.
Looking at the card, it appears to be missing the following:
1x 1.0uH inductor - orange square
2x... -
Hey guys.
Need help with this one.
Fan not spinning due to missing PWN Fan signal.
Also 5 seconds from powering up it freezes, unless in BIOS.
But as soon as Windows starts to load, it will freeze.
CPU is COLD / Room temp when it freezes.
I've replaced the CPU, same problem.
Replaced SIO/KBC IT8987e and reprogrammed - same problem.
Replaced fan - same problem.
Replaced flex cable from board to daughterboard (which has fan connector on it) - same problem.
Checked the Thermal sensors around CPU and Board to the SIO/KBC and...08-19-2024, 05:22 PM -
Hello. I would need some advice please.
My son's MBP suddenly stopped working and is now only getting the green-then-orange light on Magsafe and no fan spin.
He brought the MBP into the house (22 deg C) from a very cold conservatory (-3 deg C) and turned it on straight away. The Mac suddenly died a few minutes later.
I examined the logic board and couldn't find any signs of water damage, corrosion, blown up components etc. Nothing was ever spilt on it, and the logic board looks immaculate.
I have already replaced the logic board with another...
Comment