I have 3 of these, all with the same issue, 3 seconds to blank. I replaced the burnt out caps on all 3 screens, two of them came back alive. This is an image of the 3rd one.
In the image, the red circle is the only burnt out cap that i replaced. The blue circle is where im getting the hissing sound from.
I turn on the screen, get the high pitched hiss, the screen goes blank after a couple of seconds, the hissing stops. If i do this in the dark, i can actually see the wires leading from the board glow a blue/purple colour, this is accompanied by a chemical burning smell. I havent messed too much more than this, i understand that the currents involved could be tremendous. Does anyone have an idea as to whats happening ? is there such a thing as a dead electrolytic cap that doesnt show obvious visual cues ? Any advice is very welcome.
Thanks in advance.
In the image, the red circle is the only burnt out cap that i replaced. The blue circle is where im getting the hissing sound from.
I turn on the screen, get the high pitched hiss, the screen goes blank after a couple of seconds, the hissing stops. If i do this in the dark, i can actually see the wires leading from the board glow a blue/purple colour, this is accompanied by a chemical burning smell. I havent messed too much more than this, i understand that the currents involved could be tremendous. Does anyone have an idea as to whats happening ? is there such a thing as a dead electrolytic cap that doesnt show obvious visual cues ? Any advice is very welcome.
Thanks in advance.
Comment