Hi All, I have recently acquired a 32" Panasonic model number TX-32LXD85 that has a powering on issue.
The TV goes to standby as usual when you first switch it on then has the flashing green led light to tell you it's turning on and then the constant green light to tell you it is on.. though no picture appears. The TV after a few minutes goes to the red led standby light and blinks 13 times.
I have read that it's an issue with a communication error on the DG / A board and speifically down to IC8001 component??
My question is if others have had a similar problem and if it's an easy fix? I've found the IC8001 tag on the board but cannot identify if this is for the rather large chip or the smaller chip on the underside.. I'll try and upload some pictures later of the board but the boards part number is TNP8EAL90 (9) (A).
Any help or advice would be great as this board seems to be very expensive for an older 32" tv to replace cost effectively.
The TV goes to standby as usual when you first switch it on then has the flashing green led light to tell you it's turning on and then the constant green light to tell you it is on.. though no picture appears. The TV after a few minutes goes to the red led standby light and blinks 13 times.
I have read that it's an issue with a communication error on the DG / A board and speifically down to IC8001 component??
My question is if others have had a similar problem and if it's an easy fix? I've found the IC8001 tag on the board but cannot identify if this is for the rather large chip or the smaller chip on the underside.. I'll try and upload some pictures later of the board but the boards part number is TNP8EAL90 (9) (A).
Any help or advice would be great as this board seems to be very expensive for an older 32" tv to replace cost effectively.
Comment