Mitsubishi WS-52525 blinking green power light

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • awyatt2
    Badcaps Veteran
    • Feb 2012
    • 407
    • america

    #21
    Re: Mitsubishi WS-52525 blinking green power light

    do a reset on it, push reseet with newly installed switch off. when it boots turn on the new switch and it will most likley go. mine does that sometimes with a power failure. if that dosent work then i have no idea.

    Comment

    • tervel12
      Member
      • Dec 2010
      • 42

      #22
      Re: Mitsubishi WS-52525 blinking green power light

      I have tried turning the tv on with the switch in the off position. After the light stops blinking, I hit the reset switch. After the light stops blinking I flip the switch and then hit the power button.

      The tv turns on, but the display is still the same checkerboard pattern.

      I am still waiting on the 2 diodes and 2 caps to replace them and give it another try.

      Thanks for the help. I will update once I get the parts and install them.

      Comment

      • tervel12
        Member
        • Dec 2010
        • 42

        #23
        Re: Mitsubishi WS-52525 blinking green power light

        Okay, finally got the SMDs and replaced them. Same problem .

        When I get some more time, I want to try the video output to another device to see if the video is being output the same way or if it is good. If its the same, I guess it's scrap heap time.

        Thanks again for the input.

        Comment

        Related Topics

        Collapse

        • PantherDave
          Microsoft Surface Pro (5th gen) model 1796 - no power
          by PantherDave
          Hi all!

          I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

          I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
          https://www.badcaps.net/forum/troubl...-hardware-devi...
          05-29-2024, 02:01 PM
        • nhe quan
          MacBook Air A2681 M2 not power on , only green light of webcam
          by nhe quan
          Hello every one, i have bought macbook air M2 but not power on,
          try shift + option + control + power -> the webcam green light is on but not thing happen.
          anyone have ideas of this ?
          08-26-2025, 02:00 AM
        • techrepairheide
          MacBook Pro (A1502 / 820-3476-A) - No orange/green light and no power
          by techrepairheide
          Hello again,

          got an MacBook Pro from 2015, model A1502 and motherboard version 820-3476-A.

          Device died over night on charger.

          Currently I did the follow things:

          1. Checked visuell the board, test with another MagSafe-Charger and with another DC-IN-board too
          2. Measured 16,5V on ​PP18V5_DCIN_FUSE but 0V on ADAPTER_SENSE and 0V on PP_3V42_G3H and 0V on PPBUS_G3H but 16,5V goes to U7090
          3. Because of corrosion and bad resistor values I changed these components: U7090 / C7094 / C7095 / R7095 / R7096 / L7095 / C7099 -> But further...
          01-26-2025, 05:37 AM
        • lapfix
          HP OMEN NO power no light
          by lapfix
          HP OMEN : DAG35DMBAD0
          NO power ,no short ,no corrusion
          Consumption : when charger plg in = 0.004 amp

          Only 3/5 vl are present when charger connected..when i put my red probe at the coils of 3/5volts and power on with my power suplly it try to rise than 0v.
          when try to power on using power button i note this starnge value : 3v then 0.300v then 3v !
          No light at power button led

          All coils resistances :
          Pl 2001 =3v measured with kohm.
          pl 2004 = 5v measured with kohm
          pl 6001 = 49.7ohm
          pl 4012 = vccsa = 24.4 ohm
          pl 3001 =...
          11-03-2025, 07:48 AM
        • huzo
          HP 470 G5 blinking amber light no power
          by huzo
          The board is daox8cmb6eo and i can't find no boardview or schematics on the forum or anywhere...

          So i plug in the charger, amber light starts blinking ,there is 3.3V and 5V present, and 2.4V on the power button,board doesn't turn on, no shorts...
          I've tried flashing the bios...

          interesting thing is the battery was around 7,8V, and it's 11.1V battery, the mosfet near the battery is open, but not charging,i desoldered it,tested it and it's fine ,but the amber light kept going on the charger so i charged the battery with power supply and got it to about 10.5V...
          06-08-2023, 04:08 PM
        • Loading...
        • No more items.
        Working...