Replacing a Lucius & Baer CC14 monitor

[TEASY1980]

Hi, we are looking to replace a Lucius & Baer CC14 monitor from an early 1990s Wire erosion machine with an lcd monitor. The connector seems to be a 9 pin that is not standard. Does anyone have the pinout information for this model or any information that would help. Thanks.

[selldoor]

Re: Replacing a Lucius & Baer CC14 monitor

Hi - I dont believe this - I read your post and as I have no idea what you are talking about
thought I would google the words. I see you can buy upgrades which look expensive?
Anyway got bored with it , as I still dont understand what a wire erosion machine is and went back to the forum and found this was posted within 2 posts of yours!! WoW!!!

https://www.badcaps.net/forum/showthread.php?t=12223

It may help and I will use that to google further on the pin out side - may be an old
vga standard I can find or a cga? standard

[selldoor]

Re: Replacing a Lucius & Baer CC14 monitor

I think this gives the pin out for the 9 pin
http://www.ambery.com/db9todbadca.html
BUT note the warning all 9 to 15 pin connectors are not the same and I believe you will need some form of signal converter
to change the scan rate.
HOWEVER this may be of interest
http://www.microvitec.co.uk/low-scan-monitors.html