Replacing a Lucius & Baer CC14 monitor
Hi, we are looking to replace a Lucius & Baer CC14 monitor from an early 1990s Wire erosion machine with an lcd monitor. The connector seems to be a 9 pin that is not standard. Does anyone have the pinout information for this model or any information that would help. Thanks.
-
-
Re: Replacing a Lucius & Baer CC14 monitor
Hi - I dont believe this - I read your post and as I have no idea what you are talking about
thought I would google the words. I see you can buy upgrades which look expensive?
Anyway got bored with it , as I still dont understand what a wire erosion machine is and went back to the forum and found this was posted within 2 posts of yours!! WoW!!!
https://www.badcaps.net/forum/showthread.php?t=12223
It may help and I will use that to google further on the pin out side - may be an old
vga standard I can find or a cga? standardPlease upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740 -
Re: Replacing a Lucius & Baer CC14 monitor
I think this gives the pin out for the 9 pin
http://www.ambery.com/db9todbadca.html
BUT note the warning all 9 to 15 pin connectors are not the same and I believe you will need some form of signal converter
to change the scan rate.
HOWEVER this may be of interest
http://www.microvitec.co.uk/low-scan-monitors.htmlLast edited by selldoor; 04-19-2012, 03:13 PM.Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Normally, I never post repairs this quick after I do them, because… I am usually very slow.
But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. 
I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
-
Hi Everyone
Lately I am experiencing the deja-vu incident on one of the led monitor like this.
https://www.badcaps.net/forum/troubl...lashing-on-off
The monitor is HP 27es LED Monitor
https://h30434.www3.hp.com/t5/Deskto...e/td-p/6804692
The monitor will randomly blackout and display no signal and will recover again.
Sometimes need to power and off again to restore the display but... -
Good evening, gentlemen.
I have a problem with my monitor. It turns off after a few seconds or flickers. Shining a flashlight on the screen doesn't show any image, so I guess it's not the "2 seconds to dark" I read in the forum.
To turn it back on, I have to press the power button twice. Then after a few seconds it turns off again or flickers. See video.
https://drive.google.com/file/d/1L6S...ew?usp=sharing
Things I tried
- Bought a new AC adapter thinking that was the problem but the problem... -
Looking through my repair pictures and notes, it's been a long time since I posted anything in the LCD monitors section. So here goes that.
I'm dedicating this thread to one of the very first LCD monitors I repaired (if not the first one), which was more than 10 years ago now. The monitor is a Wise Wing, model F199. It's a 19” CFL-backlit LCD. I got it for free off of Craigslist in 2009 from a guy, who said he bought it for cheap from Wallmart and the monitor worked only for a little less than 2 years before quitting.
When I saw the Craigslist post, I wasn't... -
My pc:
10850K stock 4800mhz stock Kraken X73 good temps
2x16 GB DDR4 GSKILL 3000mhz XMP
Seasonic Tx-850 Ultra Titanium
Gigabyte Rtx 3090 Gaming OC
Aorus Z490 Pro Gaming
1 TB SSD
4 weeks ago i launched Metro Exodus Enhanced and during cinematic advertisement part ( 30 fps ), pc just shutdown.
Also monitor flickered with NO SIGNAL 10 seconds after shutdown. So only monitor and pc was affected.
Next i pressed only power button, rebooted again and its fine again. Happened once and i cant reproduce.
Power...
Comment