Hello Guys, my LED TV suddenly restored to factory default channels & settings in less than a week it always happen in my TV after I programmed, Can somebody help me at my problem. Does LED/LCD TV have battery inside.
-
-
Re: LED 32 Changhong Moonlit
Hi - welcome to the forum.
I doubt if anyone is going to know much about this set - It is the first I have heard of it.
Please can you update your profile with country and voltage.
Have you had the set from new - is it still under warranty.
What is the model number.
Do you have the owners handbook - perhaps it is performing some kind of on air update to the firmware? There may be a function to stop it doing that.
"it always happen in my TV after I programmed" - what exactly do you mean by that?Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740 -
Re: LED 32 Changhong Moonlit
Actually when I bought I had that problem, but since brought to my country, It will not cover anywarranty..Since I was not there at my home. What I mean after you programmed the channels & sets the proper time it will work for a week & can watch any cable channels or air channels, Now after how many days the clock/date will set back from default the channels I scanned would gone And I need to rescanned again the channels.Comment
-
Re: LED 32 Changhong Moonlit
Can you post the model number.
Do you switch off and unplug the tv or is it on standby all the time.
Do you get power cuts
Does it reset the clock same day and time each week
What country are you in?Last edited by selldoor; 04-19-2012, 05:26 AM.Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: LED 32 Changhong Moonlit
never heard of this tv??,but,going by the symptoms,i guess the eeprom or processor needs a constant supply,proberly taken from the standby circuit to keep time/date settings,in which case power gets unplugged,then looses the standby voltage,i know of a couple of sharp tvs do this when unplugged,loosing all the feeview/dvb programme info,if kept in standby all is good,but is never good to keep a tv in standby anyway.fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!Comment
-
Re: LED 32 Changhong Moonlit
oh,have a look too to see if there is a bios battery coin cell somewhere on the main board,if this is flat then could be the problem,need pics to really see what is going on.fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!Comment
-
Re: LED 32 Changhong Moonlit
I have seen a related problem on a Samsung. It would forget settings after being powered off. It turned out that it was set to shop demo mode, which is designed to reset the TV easily (just by turning it on and off, for shop staff.) Try going into the first time installation menu, if available.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: LED 32 Changhong Moonlit
Thank you guys for suggestion. I'm from philippines. I cant do it right now to check models & take picture but probably when I get back to my country I will double check it. If the eeprom will be the problem maybe I need to send it to electro workshop. In regards the power source I plug it off, but no power interruption. And for the battery I also want to see if theres any penny size inside.Comment
-
Hello, i had this amp sitting in the closet knowing that none of the channels were working. After taking it all apart i found 4 bulging main filter caps so i went ahead and replaced those with low ESR kmet caps. However after doing this it only restored sound to Surround L, Surround R, and Center channel. The main speaker fuse on the transformer F905/F906 keeps blowing so i decided to remove all of the transistor's on those 4 channels and measure them. All transistors appear to be in good working order(turned receiver on with none of them installed and fuse still blows). Checked dual emitter resistors... -
My tv will work for a while and change channels with the remote as it should but then it will stick on one channel only and work ok but it won't change channels. I have tried unplugging it for hours and whilst unplugged pressing the power button on the tv to reset it.
The volume button on the remote still works but it just won't change channels once it decides to stick on one channel
It has built in basic freeview tv here in the uk, I've tried doing an automatic search to reset the tv but nothing works.
I have to turn the tv off and then on again with... -
Hello.
Have this ACER Spin 5 SP514-51N that have only 5V on usb-c charging ports and usb-c comtroller CYPD5225-96BZXI heats up. so i order new controller and replace it. now u have no reaction to charger. must be this ic programmed first and if yes than how... -
Hello.
Have this asus K56cn that came with strange lcd work. so i replace it, but when i connect battery i get burned SIO. After replace, no start. must this kbc IT8517E programmed or it program itself from bios? -
Hi everybody
My ASUS PD551LA (REV 2.0), after a week powered off with power adapter disconnected, is not booting anymore.
If I plug the adapter, the battery is charging, the power led lights but after pressing the power button there is no sign of life.
I've found the Boardview file of the motherboard and the schematic of PU551JA (that looks 99% compatible).
I've disconnected the battery and all devices except screen (I removed also the RTC battery, hope it's not a problem at this stage...) and checked all signals and power rails involved in the power on s...
Comment