LG mu50pm10 with a yellow block on the screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • AT_Viper
    Member
    • Mar 2011
    • 12

    #1

    LG mu50pm10 with a yellow block on the screen

    I have an LG mu50pm10 tv just replaced the y-sus and the z-sus and I have a yellow block on my screen. Any ideas? did i buy a bad board maybe or could it be something else?

    Any help would be great. Thank you
  • PowerAmpFreak
    Badcaps Veteran
    • Feb 2010
    • 977
    • Sweden

    #2
    Re: LG mu50pm10 with a yellow block on the screen

    A photo of the problem would make it much easier for us.

    Comment

    • AT_Viper
      Member
      • Mar 2011
      • 12

      #3
      Re: LG mu50pm10 with a yellow block on the screen

      i will try to get a picture as soon as possible. The box is 10x6 inches and floats around the screen similar to the input box or no signal box.

      Comment

      • AT_Viper
        Member
        • Mar 2011
        • 12

        #4
        Re: LG mu50pm10 with a yellow block on the screen

        Here is a picture of my situation.

        Comment

        • AT_Viper
          Member
          • Mar 2011
          • 12

          #5
          Re: LG mu50pm10 with a yellow block on the screen

          No one has any idea or suggestions?

          Comment

          • Dgtech
            E. Technician
            • Apr 2009
            • 1462
            • Steeler

            #6
            Re: LG mu50pm10 with a yellow block on the screen

            Can you bring up a menu on it?
            The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS

            Comment

            • cadiman
              Badcaps Veteran
              • Mar 2010
              • 397

              #7
              Re: LG mu50pm10 with a yellow block on the screen

              What was the original problem?

              Blocks can be related to the x drive. Normally it results in a dark square. What you have I have never seen before.

              I would retrace your connections. That looks more like "human error" and not board failure.

              Comment

              • jdw1
                New Member
                • Jul 2011
                • 2

                #8
                Re: LG mu50pm10 with a yellow block on the screen

                The initial problem was the pop then out was the screen. I had replaced the Z a while back and replaced the Y this time. I redid all connections and now the screen is just black. Any guidance from there?

                Comment

                • jdw1
                  New Member
                  • Jul 2011
                  • 2

                  #9
                  Re: LG mu50pm10 with a yellow block on the screen

                  Bump for any help on this.

                  Comment

                  • Dgtech
                    E. Technician
                    • Apr 2009
                    • 1462
                    • Steeler

                    #10
                    Re: LG mu50pm10 with a yellow block on the screen

                    I'm going to post the first question again - from post #6.

                    Can you bring up a menu on it?
                    Does this happen with no input video?
                    Did you check the tab bonds / ribbon cables?
                    The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS

                    Comment

                    Related Topics

                    Collapse

                    • Ryan.man
                      Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                      by Ryan.man
                      Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                      My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                      This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                      02-04-2025, 12:23 PM
                    • smic717394
                      iphone XS turns off when press on screen.
                      by smic717394
                      Hi,

                      I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                      07-25-2024, 10:16 AM
                    • Chrissygizmo
                      Samsung UE55JU6800K half screen dark
                      by Chrissygizmo
                      Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                      I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                      02-10-2025, 12:33 AM
                    • spice_disc
                      Vizio TV M50-C1 reboot cycle and static on screen
                      by spice_disc
                      I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                      The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                      09-08-2024, 02:37 PM
                    • ipatch
                      ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
                      by ipatch
                      i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
                      08-24-2024, 02:36 PM
                    • Loading...
                    • No more items.
                    Working...