Re: LG mu50pm10 with a yellow block on the screen
No one has any idea or suggestions?
AT_Viper
Member
Last Activity: 06-19-2011, 07:46 PM
Joined: 03-05-2011
Location:
-
Re: LG mu50pm10 with a yellow block on the screen
Here is a picture of my situation....Leave a comment:
-
Re: LG mu50pm10 with a yellow block on the screen
i will try to get a picture as soon as possible. The box is 10x6 inches and floats around the screen similar to the input box or no signal box.Leave a comment:
-
LG mu50pm10 with a yellow block on the screen
I have an LG mu50pm10 tv just replaced the y-sus and the z-sus and I have a yellow block on my screen. Any ideas? did i buy a bad board maybe or could it be something else?
Any help would be great. Thank you -
Re: Oil looking spots and a darker then normal screen, Please help
Are there two different type of board setups in these LG 50px1d plasma tvs? I just got parts for mine and it is the same exact model tv but the y-sus is much much different. Are they both compatible? If so how? One connects with ribbon cables the other with metal plates.Leave a comment:
-
Re: Oil looking spots and a darker then normal screen, Please help
all fuses appear NOT to be blown. I ran the tv for about 5 minutes then felt all the heat sinks on the z-sus and they were warm. I felt the two on the y-sus and one was ice cold. Is this enough diagnosis to replace the y-sus. I just replaced (1 month ago) the z-sus board so I would hate to think it was the z-sus. Any help would be great.
Thank you by the way rayrod81 and all othersLeave a comment:
-
Re: Oil looking spots and a darker then normal screen, Please help
Updated!
Replaced the z-sus board and one month later, POP! and the screen goes black.
So obviously the z-sus isnt the REAL problem here. Something has to be making this occur.
Does anyone have any more information as to what is causing this to happen?Leave a comment:
-
Re: Oil looking spots and a darker then normal screen, Please help
In the repair manual is states the z-sus board P/N is 6871QZH036B while looking on ebay the only P/N's listed are 6871QXH044C is this just a different rev. board? (Seller states its compatible)Leave a comment:
-
Re: Lg 50px1d
my apologiesLeave a comment:
-
Re: Oil looking spots and a darker then normal screen, Please help
what is the item above Mockingbird?
Mbates14, does the z-sus need to be broken in after sitting for awhile? After some more playing when the screen switches to a mostly white picture much of the black "oil slicks" disappear. (covering only 5% of the screen) Then if i switch the channel the screen becomes oil slicked to about 20% again.Leave a comment:
-
Oil looking spots and a darker then normal screen, Please help
I just bought an LG 50px1D for $100 and the guy said it wasnt used for 6 months because there was no picture. There was sound but there was no picture. So i did some research via this awesome forum and found that it needed a new Z-SUS board. Well i took the back off and looked around and noticed the cable behind the fan, going to the Z-SUS board was unplugged! I plugged it in and bam, some pixels started turning colors and I started getting my picture back. It looks like an oil spill on my screen with about 60% of the screen visible and when the screen changes some pixels turn black before regaining...Last edited by AT_Viper; 03-05-2011, 09:44 PM. -
Re: Lg 50px1d
I have the same issue. I just bought the tv for $100 and the guy said it wasnt used for 6 months because there was no picture. There was sound but there was no picture. So i did some research via this awesome forum and found that it needed a new Z-SUS board. Well i took the back off and looked around and noticed the cable behind the fan, going to the Z-SUS board was unplugged! I plugged it in and bam, some pixels started turning colors and I started getting my picture back. It looks like an oil spill on my screen with about 60% of the screen visible and when the screen...Last edited by AT_Viper; 03-05-2011, 09:37 PM.Leave a comment:
No activity results to display
Leave a comment: