New Backlight not working. LG 50LF580V

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Pr0jectN1ne
    Member
    • Aug 2019
    • 10
    • Ireland
    #1

    New Backlight not working. LG 50LF580V

    so i got a LG 50" that had flashing backlight, then it stopped flashing and i got new backlights and its still not working. leds do work with a tester. i do get 170v on LED + and the tv shell. but on LED + and LED - is jumping to 3v. Any help much appreciated.
    Tags: None
    • Diah
      Badcaps Legend
      • Feb 2013
      • 6357
      • Germany
      #2
      Re: New Backlight not working. LG 50LF580V

      you know how to add emoji to yours post but you cant add photos so we will know what we are talking about ??

        Comment

        Previous template Next

        Related Topics

        Collapse
        • learnmore
          Samsung QE55Q60TAUXXU - flashing backlight and flashing standy light--no image
          by learnmore
          Hello Community!

          CASE DETAILS

          Promblem Signs: Backlight on 1 sec off 7sec > repeat && Red standby light: 1blink, off 3 sec, 2 blinks, off 5 secs, 2 blinks, off 3 sec, restart cycle

          13V present on powerboard output. Backlight continues flashing after removing cables to pannel one at a time and even with both disconnected. NOTE: backlight STOPs flashing and remains on when connector between powerboard and mainboard (note Tcon built in) is disconnected.

          Tried inserting firmware on USB and left it in for a few hours, but no change
          ...
          03-03-2024, 09:49 AM
        • stoian_93
          Finlux LED backlight not working
          by stoian_93
          Hello guys!
          My Finlux TV backlight stopped working. I disassembled the TV, saw I don't have the tools to replace the backlight and assembled it again without replacing anything. So then the backlight started working again.
          A day after it is also not working.
          I decided now to remove the back cover and get the output voltage to the backlight. I placed the TV facedown and connected to the mains, so - nothing. I disconected, removed the cover and connected again to the mains and then the backlight lighted again. So strange.
          Output voltage when light is 66V.
          Board: VESTEL...
          08-19-2023, 12:32 AM
        • triplefour
          UN65TU700DF picture and sound but no backlight. BL tests ok but repl. PSU didnt fix!
          by triplefour
          this tv is throwing me for a loop. do samsung tvs no longer have the backlight self test feature built into the power supply?
          i tested the backlight with my LED tester and it lights up both strips. one of them reads 100v and the other reads 63.7v.
          unplugged mainboard from power supply but left backlight plugged in, and then plugged psu wall power in. expected to see backlights light up but see nothing.
          according to how ive diagnosed in the past, this would almost always be a bad power supply. replacement power supply was cheap like 20$ from ebay. but still i get not even...
          09-13-2023, 10:43 PM
        • knoxrebel
          TCL 65s425 sound/video working, no backlight
          by knoxrebel
          Tv shows no issues other than no backlight. Picture was visible with flashlight and menu navigation possible with audible responses.

          Polyester film Capacitor c620 27nf (on power supply board had visible brown discoloration, but is not shorted. Replaced with suitable spare and now working properly. (Apparently this is a known issue with this series.)

          Backlights tested independently with tester and registered ~140vs on each.

          40-L171w4-pwa1g
          Mmkp82 1kv 273 J...
          2 Photos
          01-12-2025, 03:33 PM
        • PITERPENY
          MacBook Air A1932 Keyboard backlight not working
          by PITERPENY
          After updating the system to Sonoma, the keyboard backlight does not turn on! Preinstallation through recovery did not change the situation. Resetting smc and pram did not help! restore via dfu is also zero! I put the board in another Mac and it turns on the light! I put a board from another Mac into this one and the backlight works too! Only the original board does not turn on the backlight! Can anyone please advise, I beg you!
          03-13-2024, 07:01 PM
        • Loading...
        • No more items.
        Working...