Samsung UN60EH6000 wont come on after lightning strike.

[Davi.p]

OK, watching the circuit it's a reset chip, but top right pin is strange at around 0v, if you are able to remove this chip without damaging it you can after it power the set and with a scissor or wire perform a reset between the pads of the switch solder place..

[karthur]

Just a follow-up. I replaced the main video board from a different supplier. The TV works again.😅😅😅

Many thanks everyone for the help on this.

[nomoresonys]

Good job, glad you concentrated on getting another mainboard, SO many times people let a bad replacement board allow them wander off in the wrong direction.

[Davi.p]

Same end as always.. no technical actions done.. unfortunately for us..