Hisense 50A6G
Good afternoon, I have a Hisense 50A6G TV and it has the following defect: "When you enter the Menu by clicking the down arrow button it always returns to the top, as if the up arrow button was being pressed". I already changed the sensor but it didn't solve the problem. Has anyone already encountered this defect or could anyone help me?
-
-
Re: Hisense 50A6G
Hi Elmano ... With tv plugged in ... if there is a small rest button hole on the back. Did you try pushing it and holding it in with a paperclip or something for about 10 seconds and release. Maybe that will reset the glitch. -
Re: Hisense 50A6G
Did or are you trying it with the buttons on the tv instead of the remote if it does have buttons?Comment
-
Re: Hisense 50A6G
I'm using remoteComment
-
Re: Hisense 50A6G
Button may be stuck on the remote. Try what Sony says first if it has physical buttons on tv. It's probably remotes problem. Should also try techs reset also. Reset hole should be by HDMI plugs or around thatComment
-
Hey folks,
I'm not a professional, but I do have a decent amount of knowledge when it comes to electronic repairs.
A friend of mine recently bought a brand new Hisense 75” 4K QLED Smart TV (75E7NQTUK) but unfortunately, he cracked the screen just a few days later. Luckily, he had insurance and got a replacement right away but weirdly enough, the insurance company never asked for the broken unit back.
So, I took it off his hands and figured I'd try to repair it myself rather than see it go to waste. I've been searching for a replacement screen but can't... -
Hello,
I accidentally changed the project ID in the service menu of my Vidaa Hisense 100U7KQ TV. When I turn on the TV, the screen displays an RGB color cycle (test mode???). I contacted Hisense, and they sent me a usb_MTK_9618.EU.bin file, but it doesn't work. I can see that the USB drive is being read, and it flashes for about 10 minutes (the screen remains in the color cycle during the firmware reading), then the TV turns off and restarts, but still in the color cycle mode.
I want to mention that the 4GB USB is formatted in FAT32 MBR. I've also renamed the file to... -
HISENSE 65H6510G (13 AUGUST 2020)
When powered on, initial splash screen (HISENSE ANDROID TV) displays for a few seconds then power shuts off. Tried updating firmware with USB flash drive (can't find 4GB drive but did format larger drive in FAT32) with no luck. Flash drive would be accessed but would never get to the update process. I have ordered a board (RSAG7.820.7911/ROH, PART# 242585) from eBay which will arrive in a few days. Does anyone have any input of whether I am chasing down the right trail or should I be trying something else? I appreciate your time and wish to say thank... -
Hi all! A bit of an interesting and unusual problem: as the the title suggests I have a Hisense H50N5300UK that reboots when showing fullscreen solid red images (and some other solid colours, but red generally causes the issue the fastest). I first came across the problem assuming it was an intermittent issue, but later lucked into finding out that a title sequence of a show I watch happened to trigger the reboot.
What happens:- TV appears to operate normally, for an indefinite amount of time until a problem image appears
- The problem image is displayed very briefly, then the
-
Background:- Hisense 65H6570G stopped working and I root caused to a burnt out LED in the backlight. (For anyone interested the power light pattern when the backlight has gone is 1) two long flashes, 2) a very short third flash, then 3) back to solid red )
- I replaced all 6 of the backlight LED strips with these replacements: amazon
- The TV worked again perfectly for ~2 weeks.
- After that 2 weeks the colors became "inverted". The TV powers on and shows the boot screen in correct colors initially (aqua hisense logo on black background, pic on the left) but a few seconds after boot
Comment