Lg oled65b9dla

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • Proserot
    Member
    • Mar 2022
    • 19
    • Deutschland

    #21
    Re: Lg oled65b9dla

    Originally posted by Diah
    if you have Fire insurance to yours house... Man stop playing with it regards to your safety.
    this why there are "Panel SOS" signal.
    I wasnt actively trying to produce this, i was just trying to find the impulse origin. Didnt really expect it to randomly not shut off

    Originally posted by nomoresonys
    how about some pictures of all of this?
    I'm not sure what kind of pictures youre asking for right now. Pictures of the boards are in a comment further up the conversation (imgur)

    Comment

    • Davi.p
      Hobbist Tech
      • Sep 2009
      • 4405
      • Italy - Milan

      #22
      Re: Lg oled65b9dla

      Hi, i have followed a thread in another forum, same brand, different model, same situation, it turned out to be a bad tcon, a new tcon solved tge problem, i strongly suggest you to buy a replacement tcon, post sun light picture of yours so i can read the model codes, you must match both silkscreen code and barcode code, maybe the one that explicits the model of the panel like LF55xxxx (xx)(xx).. bye..

      Comment

      Related Topics

      Collapse

      • kca
        LG 82UN8570AUD ~ TCON or PANEL?
        by kca
        Hello all ~

        Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

        When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

        I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
        08-31-2025, 06:38 AM
      • x_orange90_x
        TCL 50S535 bad tcon or panel issue?
        by x_orange90_x
        Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
        03-29-2025, 11:02 PM
      • advant
        Driving a Sharp TCON/panel with a universal main board
        by advant
        This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

        I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
        02-03-2020, 12:25 AM
      • Hakuu
        LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
        by Hakuu
        Hi There,

        This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

        After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

        More Details

        TV Model - LG OLED77G1PUA

        Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
        07-12-2023, 02:37 PM
      • netgearnetgear
        TCL 43S423 TCON OR PANEL FAULTY???
        by netgearnetgear
        Good day, I have a TCL TV: Model 43s423. After turning ON the TV, the ROKU TV logo appears with fine lines over the whole screen, then after a while there are vertical bands in the middle of the screen top to bottom and the TV tries to update its firmware but I do not have the remote to connect it to my new network connection. Also the Power ON light blinks 2 times in quick succession. When I remove the ribbon on the right of the tcon board the left side of the screen shows but with fine lines. If I remove the left side ribbon and connect the right side ribbon the whole screen is blank with...
        08-20-2025, 06:04 PM
      • Loading...
      • No more items.
      Working...