Re: Is an L&C power supply suitable for a Celeron 2.2GHz PC?
Here's a link to the schematic of the Y-B200ATX design that Deer uses (the image is too big to be displayed directly on this forum): http://img509.*************/img509/9...chyb200atx.png
I'd consider L&C as Deer's low end power supplies, since they're commonly found in inexpensive cases.
I remember that my power supply had the C25 and C29 capacitor locations empty in its original state. C29, according to the schematic I have, is a 470uf 16V capacitor for the -5V rail, I put a Nichicon 470uf 25V capacitor in that place. The value of C25 isn't specified in the schematic, but it appears to be part of the 5V rail according to the schematic so I added a Nichicon 1000uf 6.3V capacitor in that place.
Here's a link to the schematic of the Y-B200ATX design that Deer uses (the image is too big to be displayed directly on this forum): http://img509.*************/img509/9...chyb200atx.png
I'd consider L&C as Deer's low end power supplies, since they're commonly found in inexpensive cases.
I remember that my power supply had the C25 and C29 capacitor locations empty in its original state. C29, according to the schematic I have, is a 470uf 16V capacitor for the -5V rail, I put a Nichicon 470uf 25V capacitor in that place. The value of C25 isn't specified in the schematic, but it appears to be part of the 5V rail according to the schematic so I added a Nichicon 1000uf 6.3V capacitor in that place.
Comment