Obtaining Replacement AC Adapter & Cord for Sony DVD Player

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Giacomo Siffredi
    Member
    • Aug 2013
    • 30
    • United States of America
    #1

    Obtaining Replacement AC Adapter & Cord for Sony DVD Player

    Hello!

    I am trying to obtain a replacement AC power cord and accompanying adapter for a Sony DVP-S560D DVD Player. There are several identifying numbers on the existing cord: The cylindrical portion bears the name & number: TDK ZCAT2132-1130; The "gasket" portion bears two numbers: VM3073 and 282; and the yellow adapter which plugs into the power supply board bears the name: AMP.

    Where or which types of online/retail stores might I obtain a replacement AC cord for this unit? Thank you for your assistance!
    Attached Files
    Tags: None
    • R_J
      Badcaps Legend
      • Jun 2012
      • 9518
      • Canada
      #2
      Re: Obtaining Replacement AC Adapter & Cord for Sony DVD Player

      The $ony part number is: 1-769-744-91 But I would check with some local shops etc. for a used one or just replace it with a regular power cord from something similar, make sure to connect it the same (line to line, neutral to neutral)
      You can cut half way through the strain relief part and remove it from the old cord, then use it around the new cord, the large ferrite bead can also be reused.
      As for the power supply board $0ny pt # 1-468-505-11 (adaptor) I doubt you will find one, and if you do it will cost more than the dvd player. what is wrong with that one?
      Last edited by R_J; 10-15-2018, 04:16 PM.

        Comment

        • eccerr0r
          Solder Sloth
          • Nov 2012
          • 8670
          • USA
          #3
          Re: Obtaining Replacement AC Adapter & Cord for Sony DVD Player

          It looks like it had been abruptly ... terminated...
          Probably a scrapper getting the most copper from disposed-of electronics
          Makes me sad...

            Comment

            • petehall347
              Badcaps Legend
              • Jan 2015
              • 4423
              • United Kingdom
              #4
              Re: Obtaining Replacement AC Adapter & Cord for Sony DVD Player

              i give up mouse button said i dont post my thoughts previous .. same wire thickness check the fuse ...

                Comment

                • Giacomo Siffredi
                  Member
                  • Aug 2013
                  • 30
                  • United States of America
                  #5
                  Re: Obtaining Replacement AC Adapter & Cord for Sony DVD Player

                  Thank you all for the super prompt replies!

                  Originally posted by R_J
                  The $ony part number is: 1-769-744-91 But I would check with some local shops etc. for a used one or just replace it with a regular power cord from something similar, make sure to connect it the same (line to line, neutral to neutral)
                  You can cut half way through the strain relief part and remove it from the old cord, then use it around the new cord, the large ferrite bead can also be reused.
                  As for the power supply board $0ny pt # 1-468-505-11 (adaptor) I doubt you will find one, and if you do it will cost more than the dvd player. what is wrong with that one?
                  Perhaps I didn't make myself clear regarding the Power Supply Board. I am not looking to replace it. I am in search of the AC cord with accompanying yellow plug bearing the name AMP for the reasons surmised by @eccerr0r....

                  Originally posted by eccerr0r
                  It looks like it had been abruptly ... terminated...
                  Probably a scrapper getting the most copper from disposed-of electronics
                  Makes me sad...
                  This is exactly the situation. I found this DVD Player curbside awaiting electronic recycling pickup. Aside from the already severed AC cord, this unit may be a perfectly functional unit. But safety first is always paramount when dealing with high voltage AC.

                    Comment

                    • stj
                      Great Sage 齊天大聖
                      • Dec 2009
                      • 30940
                      • Albion
                      #6
                      Re: Obtaining Replacement AC Adapter & Cord for Sony DVD Player

                      disconnect the yellow plug so we can see the working end.

                      i would use what you have and join it to a new cable with heatshrink sleeve, or solder a new cable to the board though.

                      crimp plugs wont be cheap.
                      first the contacts will probably be sold by the 100, and then the shells probably need to be purchased in 10's
                      simply because they are worth so little individually.
                      Last edited by stj; 10-16-2018, 05:05 AM.

                        Comment

                        • R_J
                          Badcaps Legend
                          • Jun 2012
                          • 9518
                          • Canada
                          #7
                          Re: Obtaining Replacement AC Adapter & Cord for Sony DVD Player

                          Originally posted by Giacomo Siffredi
                          Thank you all for the super prompt replies!


                          Perhaps I didn't make myself clear regarding the Power Supply Board. I am not looking to replace it. I am in search of the AC cord with accompanying yellow plug bearing the name AMP for the reasons surmised by @eccerr0r....
                          from post #1
                          I am trying to obtain a replacement AC power cord and accompanying adapter for a Sony DVP-S560D DVD Player
                          I thought you were refering to the power supply as the adaptor. I see you were refering to the connector as the adaptor.

                          The first thing I would do is connect another ac cord, and try the unit. Just splice another cord onto whats left of the original cord and heatshrink or just tape the connections. If you find the dvd player is ok, then get a cord.

                          Or what you can do is remove the plug from the power supply board and solder the new cord direct to the board.

                          This unit is old and likely needs the optic block replaced.

                          Here you go Digikey A122766-ND (mfg # 178125-4)
                          Attached Files
                          Last edited by R_J; 10-16-2018, 10:21 AM.

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • lti
                              Sony MDR-IF245R transmitter LED replacement
                              by lti
                              I'm looking at the transmitter from these wireless headphones because the range is too short. One of the LEDs failed many years ago (nine years ago - I found pictures that I took then) and was simply bypassed to make them work again, but it seems like the range has been degrading since then. They're near-IR LEDs (I can see them dimly lit red, so they aren't the standard 940nm), and I haven't been able to find the actual wavelength. Does anyone here happen to know what replacement LEDs I should use? Maybe I can adjust the transmitter was well while I'm in there, or there's another fault. I should...
                              06-28-2024, 01:47 PM
                            • bogosort
                              Sony DVD player stuck tray (DVP-SR310P)
                              by bogosort


                              Hello,

                              I have a Sony DVD player with a stuck tray. It seems that moving or pressing on the tray makes it work.

                              Anyone knows why?

                              Thank you....
                              05-11-2024, 04:29 PM
                            • timonix20
                              Looking for eMMC Replacement for Sony LG 60la620s EAX64797004 (1.1) with Boot Issue
                              by timonix20
                              hello everyone I am looking for a solution for my tv, I think corruption of the eemc,

                              the TV starts, LG logo, then nothing (rear backlight)
                              no reaction to rear command or infrared


                              the usb procedure that I tried on the LG site is a procedure with the screen and the remote control so I can't.


                              I have a chance with a usb procedure or other if you have .bin

                              if any people have this main board

                              Sony LG 60la620s EAX64797004 (1.1)




                              thank you...
                              04-23-2024, 01:52 PM
                            • FZG
                              Sony BVM1410PM (CRT Monitor) - Coil Choke Replacement
                              by FZG
                              Hello there, helpful forum people!

                              I am in the process of fixing an old (ca. 1990) Sony BVM1410PM CRT monitor and need some help. The PSU board of this monitor had failed and I had to replace quite a few capacitors and other parts but now - with my limited knowledge - I ran into a wall.

                              On the board there is a coil choke that has failed (tested with inductance meter) and I don´t know what to replace it with. According to the device´s service manual the part in question is a "Coil, Choke 525 uH (Sony P/N: 1-459-643-11)".

                              The original part...
                              05-10-2023, 11:54 AM
                            • Carlos#2003%
                              Schematic de una Sony VAIO PCG-41217u, Sony VPCSB45FL (MBX-237), 1p-0117j01-a012 mbx-237.
                              by Carlos#2003%
                              Buenas mi nombre es carlos me uni al foro porque estoy buscando el schematic de una sony vaio pcg-41217u otras formas de escribirlo son 1p-0117j01-a012 mbx-237 numero de placa revision 1.2 o Sony VPCSB (MBX-237), en fin me gustaria y ayudaria un monton si alguien me puede dar dichi svhematic para hacer las mediciones de una laptop de la mencionada anteriormente(Sony VAIO PCG-41217U) con el fin de repararla dejo de funcionar solo prende el led de la bateria al pulsar el boton de power el disco empiesa a hacer ruido de actividad pero los leds del frontas no reflejan acividad y no enciende la pantalla....
                              02-15-2024, 07:52 PM
                            • Loading...
                            • No more items.
                            Working...