SMPS output power upgrades and limits

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dannyx
    CertifiedAxhole
    • Aug 2016
    • 3912
    • Romania

    #1

    SMPS output power upgrades and limits

    Good day folks. Having messed with power supplies a lot, getting shocked and whatnot and constantly trying to improve my knowledge of them, I was wondering: what exactly gives the output power figure of a SMPS, let's say a wall-wart or power pack for a laptop for instance. Every power supply out there has a wattage stated on it in W, so what exactly gives this upper threshold ? There's also a current rating stated, so basically the power is the rated voltage, times the maximum current, so since we can't alter the voltage, we want to increase the current capacity.
    We know SMPSs contain several blocks, so is it the switching block (the FETs), or the rectifier block that's the bottleneck? What should be upgraded with components of higher specs to increase the power of a SMPS or at least make it more reliable after it blew and you fixed it ? The FETs, the diodes, the coil, or a combination of these perhaps ? When replacing trannies, I always choose ones higher up the range in that family for instance, so if the original was a MJE13003, I'd got with a 13009, even though these are not FETs...just a random example. Cheers guys.
    Wattevah...
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30997
    • Albion

    #2
    Re: SMPS output power upgrades and limits

    i would say the bottleneck is when the transformer saturates.
    i would also say that most psu's are already running on the limit for cost reasons.

    Comment

    • Dannyx
      CertifiedAxhole
      • Aug 2016
      • 3912
      • Romania

      #3
      Re: SMPS output power upgrades and limits

      So you say the transformer would be the decisive factor. I was curious because I got hold of a generic adjustable power brick which claims 120w (I shall post some pics soon). I hung onto it because of its reasonably strong construction, the case being all aluminum and stuff and also because it's also a step-up converter, taking a 12v input and stepping it up to anywhere from 15 to 24v, which is handy for laptops since I can run them off a battery or in my car. Thing is, the electronics inside look pretty unconvincing, I mean you take a look inside and it's clear it's not gonna take those 120w, is it ? :| There are no other figures on it, like the amps (maybe they were written on the box it came in), so we can only take guesses. One other option would be to test it to destruction by loading the hell out of it and observing at which point it (and what) fails
      Last edited by Dannyx; 05-19-2018, 09:51 AM. Reason: Corrected typo
      Wattevah...

      Comment

      • Dannyx
        CertifiedAxhole
        • Aug 2016
        • 3912
        • Romania

        #4
        Re: SMPS output power upgrades and limits

        Here's the brick in question...you're probably seen these before....the soldering is pretty piss-poor on some of the components on the back. It gets the job done at least.

        There's two transistors: one on the primary and one on the secondary, plus a diode next to the one on the secondary. From what I can make out, when plugged into the mains, it operates like a regular SMPS: the primary transistor runs the transformer which is then rectified and fed to the output. When powered from 12v, it operates in a boost converter configuration using the transistor and the coil on the secondary side. I don't know what would happen if you hooked up BOTH the mains and the 12v input A resistor network switches between the different outputs. Pretty cool idea...I like it actually. Very hackable too, like if I wanted different voltages, I could hack that resistor divider to get whatever I want, maybe with a pot or a trimmer or something. I already did this with a cigarette socket mobile phone charger and turned it into a temperature controlled driver for a fan: by using an NTC in place of one of the feedback resistors, the output voltage would go down/up depending on the temperature, but I digress
        Attached Files
        Wattevah...

        Comment

        • sam_sam_sam
          Badcaps Legend
          • Jul 2011
          • 6037
          • USA

          #5
          Re: SMPS output power upgrades and limits

          Where did you get this power supply from
          Could you please provide me with the link to it
          Thanks

          Comment

          • Dannyx
            CertifiedAxhole
            • Aug 2016
            • 3912
            • Romania

            #6
            Re: SMPS output power upgrades and limits

            Originally posted by sam_sam_sam
            Where did you get this power supply from
            Could you please provide me with the link to it
            Thanks
            Found it in a junk box at work
            Wattevah...

            Comment

            • stj
              Great Sage 齊天大聖
              • Dec 2009
              • 30997
              • Albion

              #7
              Re: SMPS output power upgrades and limits

              i think i'v seen them on ebay, or atleast something similar with a line of leds on it.

              Comment

              • Dannyx
                CertifiedAxhole
                • Aug 2016
                • 3912
                • Romania

                #8
                Re: SMPS output power upgrades and limits

                It's a generic thing as far as I can tell, probably going by many different makes and models, but the concept's the same: universal power brick.
                Wattevah...

                Comment

                • momaka
                  master hoarder
                  • May 2008
                  • 12170
                  • Bulgaria

                  #9
                  Re: SMPS output power upgrades and limits

                  Originally posted by stj
                  i would say the bottleneck is when the transformer saturates.
                  ^ That.
                  Also, for PC ATX PSUs, especially the cheaper ones, the size of the output toroid and size/capacity/count of output filter caps are another two factors. After all, who cares if your PSU can output XX Watts of "raw" power if the output ripple will be so terrible that it kills all of the attached components to it or makes your system crash.

                  Originally posted by stj
                  i would also say that most psu's are already running on the limit for cost reasons.
                  Either that, or crappy APFC circuit designs are making everything run marginal.

                  Regarding that universal power adapter:
                  You have one heatsink for the primary and secondary-side silicone. This is a *terrible* idea, especially with the way it is running close to other primary components. Basically, the isolation of this adapter (if you can even call it that) is absolutely marginal, if not outright dangerous.

                  In terms of limits, that would mostly come from the transformer size and also the power dissipation from the rectifiers and primary-side MOSFET. With bigger heatsinks and/or active cooling, you may be able to push more power, but who knows how much before that transformer saturates.
                  Last edited by momaka; 05-25-2018, 09:29 PM.

                  Comment

                  • Dannyx
                    CertifiedAxhole
                    • Aug 2016
                    • 3912
                    • Romania

                    #10
                    Re: SMPS output power upgrades and limits

                    Yeh, no need to bother - I just closed it back up and keep it around for emergency purposes only, when I quickly need to test something and don't feel like busting out my bigger sh!t just for that...
                    Wattevah...

                    Comment

                    Related Topics

                    Collapse

                    • Tynan Dill
                      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                      by Tynan Dill
                      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                      Upon bringing it home and plugging it up, it showed a standby light.

                      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                      The screen seems to blackout and stay black, but with a flashlight I can see the display.

                      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                      Assuming...
                      11-22-2024, 01:46 PM
                    • PantherDave
                      Microsoft Surface Pro (5th gen) model 1796 - no power
                      by PantherDave
                      Hi all!

                      I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

                      I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
                      https://www.badcaps.net/forum/troubl...-hardware-devi...
                      05-29-2024, 02:01 PM
                    • GLISIT
                      Asus Probook P5440UF-XB74 power issue
                      by GLISIT
                      Hi all,

                      TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                      I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                      A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                      01-16-2025, 02:29 PM
                    • shamsudeen
                      Hi, Can we use SMPS Bench Power Supply for Laptop troubleshooting?
                      by shamsudeen
                      Hi all, I just need to know that, can i use SMPS type power supply to test and short circuit detection on a laptop motherboard?
                      I saw 95% of repair guys are using only Linear bench power supply. linear bench power supply is pricy, thats why i planned to get one SMPS supply.

                      i know that in linear power supply the noise will be very low comparing to SMPS supply....
                      07-19-2025, 07:14 AM
                    • bauto601
                      KDM 480W PSU upgrade succes! (opinions?)
                      by bauto601
                      Back in 2020 i bought a (2nd hand) compact ATX psu to replace my current one. My PC case only fits very short ATX power supplies so i didn't really have the choice of buying a decent 80Plus unit. The current unit is a modded YoungYear unit that i made a thread about a while ago:
                      A "nice" YoungYear unit? - Badcaps

                      The "new" unit is a KDM-M6480 480W psu, the 480W number is a typical KDM bullshit claim of course, but the 24A rating on the 12V rail seemed reasonable and the "Active PFC" claim gave me a bit of hope that this was going to be decent-ish....
                      12-26-2023, 03:05 PM
                    • Loading...
                    • No more items.
                    Working...