Rubycon ZLQ is ok for computer power supply 5 volt rail

[sam_sam_sam]

I am recapping a computer power supply ( this one I posted a while back https://www.badcaps.net/forum/showth...ht=Sam_sam_sam )
and having a problem with the size diameter is a 8 mm but a 10 mm would fit but it will be tight fit and how tall it is not a problem

I could put in a 10 volt one in but this more for information more than anything

I think I use to have some 8 mm ones but I used them all and I can find any more of them

8 mm diameter would be better but I can not find any at all with this value
With low ESR values FR FC KY KZE or any other ones that I have used before

3300@ 6.3 and 10 volts 8 mm is what is in there now the one that is in it now is a Crapon and has pop it’s top

[stj]

Re: Rubycon ZLQ is ok for computer power supply 5 volt rail

i used to replace those with pana FK series
but maybe the new FS series has the right part.

[mockingbird]

Re: Rubycon ZLQ is ok for computer power supply 5 volt rail

I am recapping a computer power supply ( this one I posted a while back https://www.badcaps.net/forum/showth...ht=Sam_sam_sam )
and having a problem with the size diameter is a 8 mm but a 10 mm would fit but it will be tight fit and how tall it is not a problem

If you want 6.3V and 3300uF you will have to use a 10mm... ZLQ only has 2200uF in 8mm.