Hi everyone.
This is PSU from a NEC projector.
A spring got loose and shorted to ground under q201.
Blown parts found so far:
top side
fuse ( t5ah/250vac )
r115
q201
r214 ( no ohm readings )
d301 ( passing current in both directions )
d302 ( passing current in both directions )
bottom side
r208 ( no ohm readings )
r207 ( no ohm readings )
If I change the above parts will this psu work fine or there are other components which might have blown?
Also, can anyone help with the specs of r208 and r207?
I found a service menu, but there are no schematics for the psu there .
This is PSU from a NEC projector.
A spring got loose and shorted to ground under q201.
Blown parts found so far:
top side
fuse ( t5ah/250vac )
r115
q201
r214 ( no ohm readings )
d301 ( passing current in both directions )
d302 ( passing current in both directions )
bottom side
r208 ( no ohm readings )
r207 ( no ohm readings )
If I change the above parts will this psu work fine or there are other components which might have blown?
Also, can anyone help with the specs of r208 and r207?
I found a service menu, but there are no schematics for the psu there .
Comment