Bad PSU shutting down my PC

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ep9es
    Member
    • Jul 2015
    • 24
    • Spain

    #21
    Re: Bad PSU shutting down my PC

    Originally posted by goodpsusearch
    Nope

    But an esr meter is an excellent investment. You can find on ebay at very low price.
    I search ESR meter tester:
    http://www.ebay.com/sch/Electrical-T...tester&_sop=12


    Any suggestions?



    Thanks


    .

    Comment

    • mikail13
      Senior Member
      • Aug 2013
      • 93
      • Turkiye

      #22
      Re: Bad PSU shutting down my PC

      i have a same issue.
      My pc is shutting down suddenly.it's the PSU issue. That's obvious.i 've tested.

      There is no blown caps in it.

      but i desolder biggest couple of caps.

      They must be 820 mF.
      one is 720mF other 650 mF.

      are they reason of shutting?
      Last edited by mikail13; 07-26-2015, 03:46 PM.

      Comment

      • rogerazambuja
        Senior Member
        • Nov 2014
        • 88
        • Brazil

        #23
        Re: Bad PSU shutting down my PC

        After 4 days away home, I turned on my PC yesterday and after several hours running it didn't turn off. I didn't use a hair dryer on PSU, I only turned it on and no problems until now.
        Maybe after 4 days of resting my PSU fixed itself
        Should I still look for bad caps on it?

        Edit: It did shut down a few minutes after I post here.
        Last edited by rogerazambuja; 08-05-2015, 02:58 PM.

        Comment

        • Pentium4
          CapXon Be Gone
          • Sep 2011
          • 3741
          • USA

          #24
          Re: Bad PSU shutting down my PC

          Yeah I would still look for bad caps. It sounds like that's what the issue is. Teapo has a high likelihood of failing without showing symptoms.

          Comment

          • AkumAone
            Member
            • Feb 2013
            • 23
            • Bosnia and Herzegovina

            #25
            Re: Bad PSU shutting down my PC

            If the PC is reseting during load, and heating the PSU temporarily fixes the issue, then capacitors are the most probable culprit. Just replace the capacitors on the secondary side with equvalent long life ones with at least 105°C rating. Manufacturer put a bunch of wires over them blocking the airflow and overheating them, causing them to prematurely fail.

            Comment

            • Behemot
              Badcaps Legend
              • Dec 2009
              • 4845
              • CZ

              #26
              Re: Bad PSU shutting down my PC

              Seems like the platform in Chieftec I recently wrote article 'bout http://www.hardwareinsights.com/wp/r...c-cft-750-14c/ Bad caps…
              Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

              Exclusive caps, meters and more!
              Hardware Insights - power supply reviews and more!

              Comment

              • rogerazambuja
                Senior Member
                • Nov 2014
                • 88
                • Brazil

                #27
                Re: Bad PSU shutting down my PC

                Originally posted by AkumAone
                If the PC is reseting during load, and heating the PSU temporarily fixes the issue, then capacitors are the most probable culprit. Just replace the capacitors on the secondary side with equvalent long life ones with at least 105°C rating. Manufacturer put a bunch of wires over them blocking the airflow and overheating them, causing them to prematurely fail.
                Not necessarily during load, it happens usually a few minutes after boot. I will test the capacitors on the secondary side soon. Unfortunately I don't have a capacimeter, but I will try to borrow one.

                Originally posted by Behemot
                Seems like the platform in Chieftec I recently wrote article 'bout http://www.hardwareinsights.com/wp/r...c-cft-750-14c/ Bad caps…
                Looking the pictures I would say it is the same PSU.

                Comment

                Related Topics

                Collapse

                • Cmat2l
                  Hair dryer in water
                  by Cmat2l
                  Hello everyone!
                  I dropped a hair dryer in the water after using it. I pulled it out fast but it was still hot, plugged in the mains and switched off. Still in warranty but the shop I bought it is in another country. The local repair shops asked 50-60 eur for repair. The dryer cost 60 so I was thinking maybe there is smthng I could do to fix it my self. I took it apart but I reached the point that I cant understand what the problem might be. I dont have electronics knowledge. Just some basic electrical.

                  There are 3 leds that are blinking when is plugged in but it does...
                  09-15-2024, 06:58 PM
                • CapLeaker
                  Bosch Nexxt 500 dryer blinking start button - no start fix
                  by CapLeaker
                  My Bosch NEXXT 500 dryer quit today, press start nothing happens and the start button just keeps blinking. Not cool. Reset the dryer, same thing.
                  Even so the buttons feel good, my problem was the start button smd tactile switch on the PCB. Cleaned the switch with alcohol followed with Deoxit and the sucker runs like a champ again.
                  I like these easy evening fixes!
                  12-07-2023, 04:38 PM
                • notallbad
                  Heat pump tumble dryer regas
                  by notallbad
                  Just wondering if anyone has successfully attempted a re-gas on a heat pump tumble dryer.

                  The dryer currently in question runs on R134a.
                  The dryer has been completely stripped down/cleaned/tested and re-assembled however there is no heating/cooling effect so working on the assumption it requires re-gassing. Of course, its likely theres a leak which would require soldering or even the possibility that the compressor has an internal fault even though it is running.

                  I was thinking of getting a car aircon regas kit or probably easier but slightly dearer an hvac...
                  07-16-2023, 01:27 PM
                • Sam Scarbo
                  Blomberg DV17600W laundry dryer MCU firmware needed. Please help!
                  by Sam Scarbo
                  Hello,
                  I'm helping my brother to fix his Blomberg laundry dryer. He called a repair guy to have a look and the repair guy said the control board is faulty. They said the replacement board costs $400. Too expensive! 😨 My brother asks me to take a look. He has checked the door switch and thermal fuse, etc., and those seems fine.
                  After plugged to mains, there is no display. There is just a clicking sound from the buzzer, like one click per second. No other response.
                  I suspect the firmware inside the MCU (ATMEGA64A) got corrupted. Can someone in this forum by any chance provide...
                  07-21-2024, 05:24 PM
                • Joe24
                  Maytag Whirlpool Kenmore clothes dryer data bus
                  by Joe24
                  Patient is a Maytag/Whirlpool/Kenmore clothes dryer. Not sure of exact model, doesn't matter. All boards are out of production.

                  Specific problem is a Maytag 8544799 / WP8544799 motor-control board, aka Diehl Controls 708879-05. Customer states the board "doesn't work, motor doesn't run". Not sure how the repairman made that assessment, or if it's even accurate. He can't get replacement boards, and the owner decided to buy a new dryer, so whether this board is the problem is speculation on his part. Again, doesn't matter.

                  I've been over the board looking for...
                  01-13-2025, 06:50 PM
                • Loading...
                • No more items.
                Working...