Ult-500p 500w

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • thereactor
    New Member
    • Oct 2012
    • 1
    • USA
    #1

    Ult-500p 500w

    Hi all,

    I just bought a refurbished Ult-500p 500w. I hooked it up and everything starts fine but the fan on the PSU isn't running. My question: Is the fan on this PSU supposed to run constantly?

    Thanks in advance!
    Tags: None
    • c_hegge
      Badcaps Legend
      • Sep 2009
      • 5219
      • Australia
      #2
      Re: Ult-500p 500w

      I'm guessing yes, but I could be wrong.
      I love putting bad caps and flat batteries in fire and watching them explode!!

      No wonder it doesn't work! You installed the jumper wires backwards

      Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

      Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

        Comment

        • LDSisHere
          Badcaps Veteran
          • May 2012
          • 727
          • U.S.A.
          #3
          Re: Ult-500p 500w

          You may want to look at this thread: https://www.badcaps.net/forum/showthread.php?t=15306

          You may want to check the capacitors, if the fan has problems starting the supply may have been overheated. On my Ultra one of the main caps was on the verge of venting when I found it.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Document Archive
              ASUS Chromebook C204MA-C1R-CA-REFURBISHED Chromebook Specification for Upgrade or Repair
              by Document Archive
              This specification for the ASUS Chromebook C204MA-C1R-CA-REFURBISHED Chromebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the C204MA-C1R-CA-REFURBISHED boardview and C204MA-C1R-CA-REFURBISHED schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...
              09-07-2024, 02:50 AM
            • unimatrix93
              Inexive (Vestel) TV constantly blinking after plugging in
              by unimatrix93
              Hello everyone, I have a constantly blinking Inexive LED TV.
              Display is: VES390UNVA-2D-N01
              Mainboard: 17MB97​
              PSU: 17IPS71

              The TV power led start blinking constantly right after plugging it in, I tried to update via USB but did not help....
              03-26-2025, 08:36 AM
            • Robin21
              Ubiquiti US-48-500W – No LAN Port LEDs, Possible 12V Issue?
              by Robin21
              Hi everyone,

              I’ve got a Ubiquiti switch (model US-48-500W, motherboard: USW48P_BCM) on my bench. The switch powers on, but none of the LEDs next to the LAN ports light up.

              I’ve measured voltages across the board and suspect a problem with the 12V rail. At the coils where I’d expect 12V, I’m seeing around 6.3V. One coil shows a stable 6.378V, while the other fluctuates between 6.270V and 6.310V.

              All other voltages seem fine — 1V, 3.3V, and 5V are present and match the expected values.

              I've replaces both buck regulators already (AOZ1212)...
              09-25-2025, 03:24 AM
            • AlexVG
              IPAD A1673 power constantly resetting
              by AlexVG
              Hello. I came across with the power supply constantly resetting on IPAD A1673.
              (I connect it to USB power)
              PMU U8100 is rising all voltages except PP3V3_S2 . Consequently, the SYS_ALIVE is also absent.
              I have two identical boards with the same symptoms, and I think this is a common problem.
              I also have a working board. I've taken all the measurements to compare and haven't seen any abnormalities. There are no signs of a short circuit or water damage.
              VREF, IREF are also present.
              I also couldn't find any PP3V3_S2 enable signals.
              Please help me and suggest...
              09-24-2025, 05:24 PM
            • ChanHa
              Help me Resistor on FSP Hexa ATX 500w
              by ChanHa
              My ATX FSP HEXA 500W was broken, lost 5vol stand by , ic TNY 277PN is broken, and R26, but i dont know what is R26. Help me...
              06-04-2025, 08:44 PM
            • Loading...
            • No more items.
            Working...