Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thanks for share! Good luck!
Thanks for share! Good luck!
-
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thanks to everyone for your shared filesComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thanksssss !Comment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thanks very muchComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
thanks!Comment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
ThanksComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
thanks alotComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
thanks alot
Last edited by SMDFlea; 04-09-2022, 03:41 AM.Comment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thank you.Comment
-
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thank You!Comment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
thanks alotComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thank you very muchComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
thank youComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
ThanksComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
thanks,,good work,regardsComment
-
Re: A2159 MacBook Pro (13-inch, 2019) 820-01598-06
Thanks to all contribute! Much appreciate.Comment
-
hi
i whant unlock macbook pro A1932 2019 whit ibridge 9,3 ;
i change efi files find on files mina T2 activator 1,4 and use for activation mina T2 activator 1,3 , but fault ssh?
i use mina T2 ramdisk activator 1,0 and 3,0 . but whon t work ?
have you other programme or method compatible whit this macbook ibridge 9,3 for bypass ?
I need help or information?
Does anyone have the minat2 activator 1.4 software?
Or did they use it for bypass macbook air 2019 a1932 with new ibridge 9.3?
Thank yo...03-12-2025, 10:14 AM -
Trackpad clicks.
Plugging in a genuine USB-C charger and any other charger = 20V and charges all the way.
Plugging in a Dell USB-C dock or monitor causes the voltage to cycle endlessly between 5V and 19V
The Caps Lock button doesn't illuminate.
Holding the power button (fingerprint scanner) for 10 seconds stops the trackpad clicking temporarily, but it starts clicking again after 3 seconds.
If I open the lid slightly, the trackpad stops clicking (it seems to be detecting the lid opening/closing).
The keyboard backlight... -
Hi. I suspect the SSD has failed on this machine. I couldn't find answers googling it hence my question. Can you just take and replace SSD from another mac 2019 or it need to be programmed with serial numbers etc? Also eg. if my macbook is 128GB and using only one slot/bank for the SSD and another slot/bank is not being used (empty), can you remove the SSD from slot 1 and put it into slot 2, would it work? I know for a fact that those SSD are set in RAID partitions so if arranged in wrong order it's not going to work, but I'm curious if it needs programming also if the SSD can be soldered onto... -
Hello! Please help with a strange disease that I have never encountered before.
At first I got the following status:
MacBook does not turn on. Current consumption is about 0.500-0.600A at 20V from USB-C.
- no signs of rust, or spilled water
- CPU gets hot, fan still spins, no Capslocks light
then I cleaned it and I got the following video:
- Cannot install software, and after a while I get a red screen and the whole thing freezes
Macbook Pro A2159 / Bệnh lạ07-28-2025, 11:35 AM -
I need dump file for nand A2159 512GB with 2 Nand chips >.I upgraded 128gb to 512gb..I use P13 there are only 4Chips...
I need dump file MACBOOK PRO A2159
TSB4232(256)
TSB4229(256)
Thanks
Comment