New Members
Please consider donating to this site if it has helped you. We rely on these donations.
Please also introduce yourself here Introduce yourself here.
And finally, Read the Forum rules here.
Hello, I know this is an older thread, but I have a question. I have unlocked about 50 CF-31's, but this particular one is strange. I thought I correctly filled the block with 00's but when I put the chip back the lock remains. Like I said I have done about 50 so far and I have seen some that had the power on password lock where I had to fill 00's in in two places, some had one. I have searched and searched but I feel like I may be missing something. Does anyone want to take a stab at it? If it solved I would like to know what I missed. Thank you for your time and knowledge.
Hello, I know this is an older thread, but I have a question. I have unlocked about 50 CF-31's, but this particular one is strange. I thought I correctly filled the block with 00's but when I put the chip back the lock remains. Like I said I have done about 50 so far and I have seen some that had the power on password lock where I had to fill 00's in in two places, some had one. I have searched and searched but I feel like I may be missing something. Does anyone want to take a stab at it? If it solved I would like to know what I missed. Thank you for your time and knowledge.
coz you forgot to also fill 00 in the offset 00a76e77 to 00a76eb7
That was what I originally wrote 00's to. The file I uploaded was the original dump. The only difference from what you did was I did not write 00's to the "01" after "6B". Going to try your file and I will report back.
Reviving an old thread, But does anyone know why I cannot find the password on a CF-3117-01KM? I have unlocked a couple hundred of these by now (CF-31's that is), but all of the ones of this particular build I cannot seem to locate the password to fill with "00"s. I see 4 instances of "AMITSE" but nothing that shows as what is posted with the correct area highlighted. I guess I am just looking for some insight.
The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but...
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...
I'm using TONGFANG "GM7TG7P" model laptop for over 3 years and i'm entering the same bios administrator password everyday. My laptop has Aptio BIOS (American Megatrends, AMI).
But today it's not accepting my password. I'm %100 sure i'm entering the correct password.
I'm trying to reset my bios without success.
I tried :
-I removed the BIOS battery and main battery. Waited for a long time but it didn't work. They already stated in the user manual that the password will not be reset even if the batteries...
Hi, i have a Panasonic Cf-W5 with the bios password, I tried remove cmos but problem didnot solve.
I uploaded the picture after remove cmos battery, It look like this is a Phoenix bios. The bios dump file in the link i attached
Please help me remove bios password.
Thank you so much
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set....
Comment