Hello, I know this is an older thread, but I have a question. I have unlocked about 50 CF-31's, but this particular one is strange. I thought I correctly filled the block with 00's but when I put the chip back the lock remains. Like I said I have done about 50 so far and I have seen some that had the power on password lock where I had to fill 00's in in two places, some had one. I have searched and searched but I feel like I may be missing something. Does anyone want to take a stab at it? If it solved I would like to know what I missed. Thank you for your time and knowledge.
Hello, I know this is an older thread, but I have a question. I have unlocked about 50 CF-31's, but this particular one is strange. I thought I correctly filled the block with 00's but when I put the chip back the lock remains. Like I said I have done about 50 so far and I have seen some that had the power on password lock where I had to fill 00's in in two places, some had one. I have searched and searched but I feel like I may be missing something. Does anyone want to take a stab at it? If it solved I would like to know what I missed. Thank you for your time and knowledge.
coz you forgot to also fill 00 in the offset 00a76e77 to 00a76eb7
That was what I originally wrote 00's to. The file I uploaded was the original dump. The only difference from what you did was I did not write 00's to the "01" after "6B". Going to try your file and I will report back.
Reviving an old thread, But does anyone know why I cannot find the password on a CF-3117-01KM? I have unlocked a couple hundred of these by now (CF-31's that is), but all of the ones of this particular build I cannot seem to locate the password to fill with "00"s. I see 4 instances of "AMITSE" but nothing that shows as what is posted with the correct area highlighted. I guess I am just looking for some insight.
Comment