Hello. i need unlock bios for HP 850 g8.
SN# 5CG1351RTT
HP BIOS unlock tool
Collapse
X
-
You can buy a SOP16 clip to go with your programmer, or if you have the tools to desolder the chip get a SOP16 test socket or adapter boardLeave a comment:
-
Hi
I have an HP 8470p with W25Q128BVFG bios chip. Is there a way to reset the password without dumping the chip using a programmer?
Also all the instructions are for the 8 pins chips. This 16 pins chip is a bit different. Would you please help me here? thank youLeave a comment:
-
Hello,
yhank you for your help but I have a problem.
the keyboard is out of order (I did not know that "detail") so I did desold and resold twice but at the second time, I swipe one or two components (I'm sure for one, this circle alone, next the white arrow).
I think it was resistors.
Do you have the resistance of them?
EDIT> I found what I need on the forum :-)
Very nice forum here!
Leave a comment:
-
yhank you for your help but I have a problem.
the keyboard is out of order (I did not know that "detail") so I did desold and resold twice but at the second time, I swipe one or two components (I'm sure for one, this circle alone, next the white arrow).
I think it was resistors.
Do you have the resistance of them?
EDIT> I found what I need on the forum :-)
Very nice forum here!Leave a comment:
-
Serial_5CG9236L4L
Product_2FA66AV
Fearture byte_3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbUbhcAdUdpdqhKhkjh.F5
Build Id_17WWCSCT601#SABF#DABF
Attached FilesLeave a comment:
-
Hello, I need to remove the password on a Elitebook 840 G5.
RC unlocker did not work because it is a 32MB EEPROM...
Prod ID 2FA66AV
SN 5CG9236L4L
motherboard C0796B10WEA rev1.11 (Full Intel, no dedicaced GPU)
ThanX!Attached FilesLeave a comment:
-
Thank You hoaca388 for all the help. It worked great. Laptop is all working. I've lost some bios information but I will search out the HP tools on this site to help input some of the lost info. I know I came across a bunch of info.Leave a comment:
-
HP EliteBook 840 G2 Base Model Notebook PCLeave a comment:
-
This is what I used from post 19Leave a comment:
-
Hello all. I followed the link as best I could. Flashed the bios again. Laptop is fully functional but very slow startup and HP logo sign. I am not sure what file to use if EC needs to be repaired. All laptop info looks correct in bios. I assume that is ME area? I'm confused as this is a bin right from here and every comment says no issues
Any help would be great.Leave a comment:
-
Hello all. I followed the link as best I could. Flashed the bios again. Laptop is fully functional but very slow startup and HP logo sign. I am not sure what file to use if EC needs to be repaired. All laptop info looks correct in bios. I assume that is ME area? I'm confused as this is a bin right from here and every comment says no issues
Any help would be great.Leave a comment:
-
https://www.badcaps.net/forum/troubl...itebook-840-g2Leave a comment:
-
Thank You for the help
So my orig bios was verified and still bad.
Any suggestions on where to go from here?Leave a comment:
-
Funny thing before I zip the file they are both 16.0 MB (16,777,216 bytes)
Why would this be?
I've read alot on this forum today and not sure to install a new bios and then try to go trough the process of installing all bios information. Not sure its a little more than I can understand at this point.Leave a comment:
-
Funny thing before I zip the file they are both 16.0 MB (16,777,216 bytes)
Why would this be?
I've read alot on this forum today and not sure to install a new bios and then try to go trough the process of installing all bios information. Not sure its a little more than I can understand at this point.Leave a comment:
-
Hey guys. Need help. So I used HpUnlocker on my functional 840 G2 laptop. I saved the orig dump. Ran it through the program and flashed it back with verify. Now laptop has black screen and caps light flashing. Tried multiple times. Then I downloaded HP bios from site and installed through holding "B" and it fixed it BUT now it says
Custom logo image greater than 1024x760
Warning Machine is not in committed state
Good news is there is no password
I have attached both
I'm at a loss and hopefully someone can help
FYI other than probably my mistakes this tool is Amazing
I seem to be posting in the wrong places lately so I hope as this has everything to do with HpUnlocker it's right.
Leave a comment:
-
HP EliteBook 840 G2
Ser # 5CG609237S
System Board ID 2216
MB info N/A at this timeLeave a comment:
-
Hey guys. Need help. So I used HpUnlocker on my functional 840 G2 laptop. I saved the orig dump. Ran it through the program and flashed it back with verify. Now laptop has black screen and caps light flashing. Tried multiple times. Then I downloaded HP bios from site and installed through holding "B" and it fixed it BUT now it says
Custom logo image greater than 1024x760
Warning Machine is not in committed state
Good news is there is no password
I have attached both
I'm at a loss and hopefully someone can help
FYI other than probably my mistakes this tool is Amazing
I seem to be posting in the wrong places lately so I hope as this has everything to do with HpUnlocker it's rightLeave a comment:
Related Topics
Collapse
-
by salim5566Hi guys i like to buy tool that automatic unlock bios or find password also can flash and repair bios ic, looking for good tool have good software that have 1 click and unlock bios any recommend good tool? looking for sony ps5 and and laptop bios
Thanks-
Channel: BIOS Requests ONLY!
-
-
by zeniusHello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...-
Channel: BIOS Requests ONLY!
-
-
by CityminHi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70...-
Channel: BIOS Requests ONLY!
-
-
by m1ch43lzmHi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R...-
Channel: BIOS Requests ONLY!
-
-
by Forest79Hello,
I got a Lenovo ThinkStation P520 (Type 30BF) from a friend, asking me for a repair. Windows 11 offered a firmware upgrade as an optional update, and it failed.
The emergency flash procedure from the hardware manual has also failed. So, I asked an acquaintance with better skills to flash the BIOS directly.
However, the chip (a Macronix MX25L25673GMI-08G) has a size of 32 MB, and the BIOS file from the Lenovo website (extracted with UEFITool) has a little more than 16 MB. Thus, the software my acquaintance used (SiberiaProg v1.45, with a CH341A Programmer)...-
Channel: BIOS & Schematic Requests!
-
- Loading...
- No more items.
Leave a comment: