lenovo Flex 5 bios need

[hoaca388]

here is the corrupted bios


can you help ? thanks

You DMI added

[jackkyxu]

Yes, it is very important, the DMI of a machine is to differentiate it from another machine.You just flash it and then add DMI later.

here is the corrupted bios


can you help ? thanks

[hoaca388]

sorry to bother you again

what is the consequence if I flashed a bios without DMI?

if it is very important, I can try to get someone to dump a corrupted bios

thank you

Yes, it is very important, the DMI of a machine is to differentiate it from another machine.You just flash it and then add DMI later.

[jackkyxu]

Since you don't have the original bios, this one doesn't have DMI.

sorry to bother you again

what is the consequence if I flashed a bios without DMI?

if it is very important, I can try to get someone to dump a corrupted bios

thank you

[hoaca388]

hi can help me with a bios


Flex 5-14ARE05 Laptop (ideapad) - Type 81X2
R912X34C MTM 81X20002US
board id: LC55-14A 19793 1M


thanks

Since you don't have the original bios, this one doesn't have DMI.

[jackkyxu]

Here

hi can help me with a bios


Flex 5-14ARE05 Laptop (ideapad) - Type 81X2
R912X34C MTM 81X20002US
board id: LC55-14A 19793 1M


thanks

[jackkyxu]

post the contents of the bios chip even if it is corrupted..

I did not back up the original bios

and my symptom is almost the same as above, I ran the EECN44WW bios downloaded from lenovo site and the laptop rebooted but now only shows a black screen

[hoaca388]

Hello good day brother.

I would like to ask for your assistance. I'm still encountering an issue with my Lenovo Flex 5-14ARE05 Laptop (Ideapad, Type 81X2, Serial: R90YSZF1, MTM: 81X2003HPHI). The problem began after I attempted to update the BIOS by double-clicking the EECN44WW.exe file downloaded from the Lenovo website. I also installed chipset drivers and other system drivers.

After the BIOS update, the laptop rebooted but now only shows a black screen. There is no POST, no display (not even on an external monitor), and the battery indicator does not show charging. The keyboard lights up, but I cannot access BIOS or use the Novo button. The device uses AMD architecture.

I tried flashing a fresh BIOS from Lenovo's official support site and also restored the DMI and Win key. Now, I am able to access the BIOS. However, when set to UEFI, the screen remains black with only backlighting. When switched to Legacy Boot, it gets stuck on the Lenovo logo. Secure Boot is already disabled. The system can detect the SSD and USB devices, and the Novo button works, but it won't boot from any bootable device—not even for OS installation or system recovery. I also attached my working BIOS version It's all working before I update also the current BIOS now with stuck black screen and stuck lenovo logo issue.

Thank you for the help..

Here

[shansnow]

Hello good day brother.

I would like to ask for your assistance. I'm still encountering an issue with my Lenovo Flex 5-14ARE05 Laptop (Ideapad, Type 81X2, Serial: R90YSZF1, MTM: 81X2003HPHI). The problem began after I attempted to update the BIOS by double-clicking the EECN44WW.exe file downloaded from the Lenovo website. I also installed chipset drivers and other system drivers.

After the BIOS update, the laptop rebooted but now only shows a black screen. There is no POST, no display (not even on an external monitor), and the battery indicator does not show charging. The keyboard lights up, but I cannot access BIOS or use the Novo button. The device uses AMD architecture.

I tried flashing a fresh BIOS from Lenovo's official support site and also restored the DMI and Win key. Now, I am able to access the BIOS. However, when set to UEFI, the screen remains black with only backlighting. When switched to Legacy Boot, it gets stuck on the Lenovo logo. Secure Boot is already disabled. The system can detect the SSD and USB devices, and the Novo button works, but it won't boot from any bootable device—not even for OS installation or system recovery. I also attached my working BIOS version It's all working before I update also the current BIOS now with stuck black screen and stuck lenovo logo issue.

Thank you for the help..

[peste]

hi

please help me with a bios


Flex 5-14ARE05 Laptop (ideapad) - Type 81X2
R912X34C MTM 81X20002US
board id: LC55-14A 19793 1M


thanks

post the contents of the bios chip even if it is corrupted..

[jackkyxu]

hi

please help me with a bios


Flex 5-14ARE05 Laptop (ideapad) - Type 81X2
R912X34C MTM 81X20002US
board id: LC55-14A 19793 1M


thanks

[shansnow]

Hello everyone. Kindly help me fix with my corrupted.bin file please.
issue : NO POST. uploaded 3 bin for confirmation.

Flex 5-14ARE05 Laptop (ideapad) - Type 81X2
R90YSZF1 MTM 81X2003HPH

Thank you

Hello Sir, Thank you for the effort. I can see the Bios settings now and Novo button is working. Unfortunately it stucks in Lenovo logo when I set to Legacy boot..if EUFI boot only black screen with backlight. Can't detect also any bootable media. I've tried too install an Windows 10 OS. with another driver but the issue still thesame. Please help me with this sir.. Thank you.That is my BIOS IC. Im using Neoprogrammer ch341a programmer with 1.8V converter.it's and AMD Rizen 5. thank you sir.

[hoaca388]

Hello everyone. Kindly help me fix with my corrupted.bin file please.
issue : NO POST. uploaded 3 bin for confirmation.

Flex 5-14ARE05 Laptop (ideapad) - Type 81X2
R90YSZF1 MTM 81X2003HPH

Thank you

Flex 5-14ARE05 Laptop (ideapad) - Type 81X2

[shansnow]

Hello everyone. Kindly help me fix with my corrupted.bin file please.
issue : NO POST. uploaded 3 bin for confirmation.

Flex 5-14ARE05 Laptop (ideapad) - Type 81X2
R90YSZF1 MTM 81X2003HPH

Thank you

[Shako]

Here. Bios + DMI.

It works. With SN and everything. Thank you very much.

[SMDFlea]

Hi peste, thanks for your quick response. I have tried the link you sent but now the laptop is not turning on at all. Then I have seen that that ist for 14alc05 81yq and I have 15are05 81X2. Then I downloaded from this Poss #3 BIOS it works but my SN and MTM are showing INVALID in BIOS. How can I have my original SN and MTM number in BIOS. Please help. Thank you.

Here. Bios + DMI.

[Shako]

try post #4..
https://www.badcaps.net/forum/troubl...os#post1758667

Hi peste, thanks for your quick response. I have tried the link you sent but now the laptop is not turning on at all. Then I have seen that that ist for 14alc05 81yq and I have 15are05 81X2. Then I downloaded from this Poss #3 BIOS it works but my SN and MTM are showing INVALID in BIOS. How can I have my original SN and MTM number in BIOS. Please help. Thank you.

[peste]

Hello guys. Can you please help me with my BIOS. Laptop turns on and has a black screen.

Lenovo IdeaPad Flex 5 14ARE05 Type:81X2

SN: R9128CCK
MTM:81X20099GE
MO:R9N0B132700F

I would really love to keep my Serial Number.

Thanks in advance.

try post #4..
https://www.badcaps.net/forum/troubl...os#post1758667

[Shako]

Hello guys. Can you please help me with my BIOS. Laptop turns on and has a black screen.

Lenovo IdeaPad Flex 5 14ARE05 Type:81X2

SN: R9128CCK
MTM:81X20099GE
MO:R9N0B132700F

I would really love to keep my Serial Number.

Thanks in advance.

[hoaca388]

Hello, i need bios rebuild or dmi and widnows key trasfered. Turns on, black screen, no post. Tried dump with no dmi (from #3 post) computer turns on, works perfectly.

IDEAPAD FLEX 5 14ARE05
SN R9121R2B
MTM 81X2009JLT
BOARD LC55-14A 19793-3

Flex 5-14ARE05 Laptop (ideapad) - Type 81X2